Forum

Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 58
  1. #31
    Join Date
    December 2009
    Location
    Germany
    Posts
    76
    Quote Originally Posted by dante696 View Post
    We think the Codecs are obsolete when offering Opus.
    Even the original development from speex thinks that.

    And for us and users there is no advantage using them.
    - The Opus codec delivers better quality with much better compression and still gets updated.
    - Less permissions are needed for administration.
    - User do not set such codec and make others think that TeamSpeak sounds bad.
    - Celt still causes crashes on some mobile clients.

    We should've done that years ago.
    dante696 Thank you for the explanation

    i love the CELT but i understand the "why"

  2. #32
    Join Date
    December 2015
    Location
    /home
    Posts
    10
    Did you use an old IP location DB for the Beta?

    Since the Beta one of my servers (client side) are located at a country where the IP has been 2 years ago. It's a static IP.


    http://www.ip2location.com/free.asp shows right location btw.

  3. #33
    Join Date
    February 2018
    Location
    Hamburg
    Posts
    12
    Quote Originally Posted by Night Stalkers View Post
    Did you use an old IP location DB for the Beta?

    Since the Beta one of my servers (client side) are located at a country where the IP has been 2 years ago. It's a static IP.


    http://www.ip2location.com/free.asp shows right location btw.
    same issue here, server was always located in germany (where it is) and now its france. LoL

  4. #34
    Join Date
    February 2017
    Location
    Australia
    Posts
    86
    Quote Originally Posted by dante696 View Post
    We think the Codecs are obsolete when offering Opus.
    Even the original development from speex thinks that.

    And for us and users there is no advantage using them.
    - The Opus codec delivers better quality with much better compression and still gets updated.
    - Less permissions are needed for administration.
    - User do not set such codec and make others think that TeamSpeak sounds bad.
    - Celt still causes crashes on some mobile clients.

    We should've done that years ago.
    Totally agreeable, I was contacted while remote about the poor quality on my personal server (coming from other users that also use ts3 daily). Turns out I had my channels on speex. Glad to see them gone.

    Also thanks for having a menus to change the codec from mobile.

  5. #35
    Join Date
    June 2008
    Posts
    17,724
    We will rework the IP database for stable release.

    Quote Originally Posted by Screech View Post
    Nope, don't do it, I just finished updating both of my servers to CentOS 7. LOL.
    You did something great here by updating your system(s)
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  6. #36
    Join Date
    November 2010
    Location
    Germany
    Posts
    36
    Thx for repairing the the clientdblist problem!



    Using the Query in this case as raw (no SSH), about a PHP script (library of ScP).


    With older version
    TS3 Server version: 3.5.1 on Linux [Build: 1545076855 from 2018-12-17 21:00:55]

    2019-03-03 17:51:38.594568 INFO Get TS3 Clientlist [DONE]
    2019-03-03 17:51:38.594521 DEBUG Got TS3 Clientlist 23130 of 23130 Clients.
    [..]
    2019-03-03 17:41:28.447664 DEBUG Got TS3 Clientlist 600 of 23129 Clients.
    2019-03-03 17:41:22.955145 DEBUG Got TS3 Clientlist 400 of 23129 Clients.
    2019-03-03 17:41:17.513533 DEBUG Got TS3 Clientlist 200 of 23129 Clients.
    2019-03-03 17:41:12.062112 INFO Get TS3 Clientlist...
    2019-03-03 17:41:12.062062 NOTICE Scanning for clients to delete...



    With current beta
    TS3 Server version: 3.7.0-beta1 on Linux [Build: 1551271723 from 2019-02-27 13:48:43]

    2019-03-04 08:27:33.724068 INFO Get TS3 Clientlist [DONE]
    2019-03-04 08:27:33.724013 DEBUG Got TS3 Clientlist 23142 of 23142 Clients.
    [..]
    2019-03-04 08:27:31.806470 DEBUG Got TS3 Clientlist 600 of 23142 Clients.
    2019-03-04 08:27:31.801499 DEBUG Got TS3 Clientlist 400 of 23142 Clients.
    2019-03-04 08:27:31.795683 DEBUG Got TS3 Clientlist 200 of 23142 Clients.
    2019-03-04 08:27:31.790817 INFO Get TS3 Clientlist...
    2019-03-04 08:27:31.790764 NOTICE Scanning for clients to delete...

  7. #37
    Join Date
    December 2015
    Posts
    244
    Quote Originally Posted by Newcomer1989 View Post
    2019-03-03 17:51:38.594521 DEBUG Got TS3 Clientlist 23130 of 23130 Clients.
    [..]
    2019-03-03 17:41:28.447664 DEBUG Got TS3 Clientlist 600 of 23129 Clients.


    2019-03-04 08:27:33.724013 DEBUG Got TS3 Clientlist 23142 of 23142 Clients.
    [..]
    2019-03-04 08:27:31.806470 DEBUG Got TS3 Clientlist 600 of 23142 Clients.
    They brought down the time for getting all clients by 10 (ten) minutes? To now 2 seconds?

    Wow. This is some crazy optimization. Or some very very very bad programming before.
    I guess sits the later tbh

  8. #38
    Join Date
    August 2009
    Location
    England
    Posts
    19
    No issues whatsoever with the current beta except for incorrect flags for some users, though I see you mentioned it will be sorted in stable release so I guess it's fine.

    //Edit

    I just noticed, some channels with reached user limit (2/2) do no highlight with red, I never noticed that in stable releases, check it out some are red others are not.

    Name:  XsE3NFA.png
Views: 365
Size:  252.7 KB
    Last edited by Fubister; March 5th, 2019 at 06:53 PM. Reason: update

  9. #39
    Join Date
    November 2010
    Location
    Germany
    Posts
    36
    I can give an additional feedback to the performance of the new version.

    Tested with the raw (no SSH) query, with a PHP script (library of ScP).

    On old server version (3.6.1) the script needs an average runtime of 0,0793 seconds for one duration.
    Without changing anything else, after the TS server update it needs an average runtime of 0,0709 seconds for one duration.

    That is a query perfomance boost of ~10,5 %! -> Good job for this!

    Sure, with PHP as third party, it is not 100% evaluable. But it gives an approximate trend.

    That were the hard facts.

    I have one more, but this is only a feeling (haven't measured it accurate), the CPU usage of the server process is lower than before. Would say, it's the half of before! But sorry, haven't any numbers here. Perhaps others can also give a report of their observation.

  10. #40
    Join Date
    June 2008
    Posts
    17,724
    Quote Originally Posted by Fubister View Post
    I just noticed, some channels with reached user limit (2/2) do no highlight with red, I never noticed that in stable releases, check it out some are red others are not.
    It's the client doing that. The server only sends the amount of users and the client interface sets the colors and needed icons.

    Currently I do not remember why this icon is blue in some full channels. Need to test it when back at my computer.

    Quote Originally Posted by Newcomer1989 View Post
    I have one more, but this is only a feeling (haven't measured it accurate), the CPU usage of the server process is lower than before. Would say, it's the half of before! But sorry, haven't any numbers here. Perhaps others can also give a report of their observation.
    The CPU usage should be nearly the same as before OR minimal higher when measured.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  11. #41
    Join Date
    September 2016
    Posts
    45
    Could you at least make a micro update to solve flags issue? ... I think that that is a potential issue...
    Don't worry about delaying next release ^^
    Last edited by dante696; March 12th, 2019 at 09:37 AM. Reason: moved to right thread

  12. #42
    Join Date
    June 2008
    Posts
    17,724
    Maybe a beta 2 (without the Cent OS 6 support) will be released today.
    That version will fix the ip2ocation database.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  13. #43
    Join Date
    November 2010
    Location
    Germany
    Posts
    36
    Quote Originally Posted by dante696 View Post
    Maybe a beta 2 (without the Cent OS 6 support) will be released today.
    That version will fix the ip2ocation database.
    Why need to push a new version to update the ip2location database? Why the server process can't update this database independently?

  14. #44
    Join Date
    June 2008
    Posts
    17,724
    It's not that we don't want it but we can not do this.
    It must be included in the server binary we build for a release.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  15. #45
    Join Date
    November 2010
    Location
    Germany
    Posts
    36
    Quote Originally Posted by dante696 View Post
    It must be included in the server binary we build for a release.
    Why don't save this information inside the database? You could cache this values and update it from the database every X minutes/hours.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Discussion] TeamSpeak Server 3.6.0 beta
    By dante696 in forum Suggestions and Feedback
    Replies: 21
    Last Post: January 22nd, 2019, 07:23 AM
  2. [Discussion] TeamSpeak 3 Server 3.3.0 Beta
    By Chris in forum Suggestions and Feedback
    Replies: 93
    Last Post: July 30th, 2018, 01:43 PM
  3. [Discussion] TeamSpeak Server 3.1.1 Beta
    By Chris in forum Suggestions and Feedback
    Replies: 18
    Last Post: February 23rd, 2018, 11:42 AM
  4. [Discussion] TeamSpeak Server 3.1.0 Beta
    By Chris in forum Suggestions and Feedback
    Replies: 96
    Last Post: February 13th, 2018, 05:44 PM
  5. [Discussion] TeamSpeak 3.1.1 Beta Discussion
    By Chris in forum Suggestions and Feedback
    Replies: 15
    Last Post: February 10th, 2017, 05:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •