Forum

Page 4 of 4 FirstFirst ... 234
Results 46 to 59 of 59
  1. #46
    Join Date
    March 2017
    Posts
    2
    Just FYI, it is no single occurence. I got the same issue as Ragyal.
    3.8.0 won't start and doesn't create any log entries.

    System: Ubuntu 16.04
    glibc is up to date.

  2. #47
    Join Date
    June 2008
    Posts
    17,933
    Then please follow that.
    Quote Originally Posted by dante696 View Post
    for those who reported that the server does not start
    Please post the output from
    Code:
    ldd --version
    u name -a    (remove the space between u and name before you use the command. and add it again when you try to post the result.)
    And
    Quote Originally Posted by dante696 View Post
    Can you try following?
    Download the server again and overwrite the old installation.
    Install a fresh server on a new location (do not add anything else and do not use an existing database).
    and
    Quote Originally Posted by dante696 View Post
    On fresh install please try to start the server without the startscript
    Code:
    ./ts3server license_accepted=1
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  3. #48
    Join Date
    February 2017
    Posts
    13
    Quote Originally Posted by dante696 View Post
    On fresh install please try to start the server without the startscript
    Code:
    ./ts3server license_accepted=1
    Code:
    [email protected]:/usr/local/teamspeak3/dev$ tar jxf teamspeak3-server_linux_amd64-3.8.0.tar.bz2 
    [email protected]:/usr/local/teamspeak3/dev$ cd teamspeak3-server_linux_amd64
    [email protected]:/usr/local/teamspeak3/dev/teamspeak3-server_linux_amd64$ ./ts3server license_accepted=1
    [email protected]:/usr/local/teamspeak3/dev/teamspeak3-server_linux_amd64$ ls -al
    total 15972
    drwxr-xr-x 7 teamspeak3 teamspeak3     4096 Mai 27 08:37 .
    drwxrwxr-x 3 teamspeak3 teamspeak3     4096 Jun 13 13:32 ..
    -rw-rw-r-- 1 teamspeak3 teamspeak3    65302 Mai 27 08:32 CHANGELOG
    drwxr-xr-x 3 teamspeak3 teamspeak3     4096 Mai 27 06:06 doc
    -rwxr-xr-x 1 teamspeak3 teamspeak3   947368 Mai 27 08:37 libts3db_mariadb.so
    -rwxr-xr-x 1 teamspeak3 teamspeak3  2174344 Mai 27 08:37 libts3db_sqlite3.so
    -rwxr-xr-x 1 teamspeak3 teamspeak3  1067488 Mai 27 08:37 libts3_ssh.so
    -rw-r--r-- 1 teamspeak3 teamspeak3    68141 Apr 12 04:46 LICENSE
    drwxr-xr-x 2 teamspeak3 teamspeak3     4096 Mai 27 08:37 redist
    drwxrwxr-x 2 teamspeak3 teamspeak3     4096 Mai 27 06:03 serverquerydocs
    drwxrwxr-x 5 teamspeak3 teamspeak3    12288 Mai 27 06:03 sql
    -rwxr-xr-x 1 teamspeak3 teamspeak3 11980592 Mai 27 08:37 ts3server
    -rwxrwxr-x 1 teamspeak3 teamspeak3      117 Mai 27 06:03 ts3server_minimal_runscript.sh
    -rwxrwxr-x 1 teamspeak3 teamspeak3     2629 Mai 27 06:03 ts3server_startscript.sh
    drwxr-xr-x 2 teamspeak3 teamspeak3     4096 Mai 27 08:37 tsdns
    [email protected]:/usr/local/teamspeak3/dev/teamspeak3-server_linux_amd64$

  4. #49
    Join Date
    September 2018
    Posts
    2
    Hey,

    unfortunately this update leads to a connection timeout of a query if many commands are sent. Is there a possibility to disable this feature? Because if you're using a Query Bot than it would be quit nice if the bot wouldn't crash because of a timeout.

    Greetings
    Calvin M.

  5. #50
    Join Date
    June 2008
    Posts
    17,933
    Everything looks fine.

    Can you post us the output from strace and gdb?
    Code:
    strace ./ts3server license_accepted=1 2> trace.out
    The trace.out file can be found in server folder then
    Code:
    gdb  -ex run --args ./ts3server license_accepted=1
    Thank you for the assistance!
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  6. #51
    Join Date
    February 2017
    Posts
    13
    Quote Originally Posted by dante696 View Post
    Can you post us the output from strace and gdb?
    Code:
    strace ./ts3server license_accepted=1 2> trace.out
    The trace.out file can be found in server folder then
    Code:
    gdb  -ex run --args ./ts3server license_accepted=1
    trace.out has been renamed to trace.out.log to able to upload.

    Code:
    [email protected]:/usr/local/teamspeak3/dev/teamspeak3-server_linux_amd64$ gdb  -ex run --args ./ts3server license_accepted=1
    GNU gdb (Ubuntu 7.11.1-0ubuntu1~16.5) 7.11.1
    Copyright (C) 2016 Free Software Foundation, Inc.
    License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
    This is free software: you are free to change and redistribute it.
    There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
    and "show warranty" for details.
    This GDB was configured as "x86_64-linux-gnu".
    Type "show configuration" for configuration details.
    For bug reporting instructions, please see:
    <http://www.gnu.org/software/gdb/bugs/>.
    Find the GDB manual and other documentation resources online at:
    <http://www.gnu.org/software/gdb/documentation/>.
    For help, type "help".
    Type "apropos word" to search for commands related to "word"...
    Reading symbols from ./ts3server...(no debugging symbols found)...done.
    Starting program: /usr/local/teamspeak3/dev/teamspeak3-server_linux_amd64/ts3server license_accepted=1
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
    [Inferior 1 (process 13019) exited with code 01]
    (gdb)
    Attached Files Attached Files
    Last edited by Ragyal; June 14th, 2019 at 04:05 PM.

  7. #52
    Join Date
    June 2008
    Posts
    17,933
    We could not identify the reason yet but it seems that there is something strange with your Kernel.
    Code:
    getrandom(0x7fff33a59f20, 128, 0)       = -1 ENOSYS (Function not implemented)
    This function should be implemented in Kernel 4.40 already. Even with that error the server should run.

    So we will change the behavior for upcoming server 3.9.0 a bit and should get more information.
    A beta is planned to be released later that day and it would be nice if you can test it out.


    For others who reported the crash:
    Are you also on a machine from Strato or on non default Ubuntu Kernel?
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  8. #53
    Join Date
    June 2008
    Posts
    17,933
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  9. #54
    Join Date
    March 2018
    Posts
    5
    Same Problem for me still exists. lld is on version 2.24. Normally the server runs on a Pi with x86 emulator. But i tryed it also on a x64 machine from me, same problem then and nothing changes. Tested this to prevent incompatibilit issues with the emulator maybe. Just to be sure it happens also on a normal up to date x64 debian machine.

  10. #55
    Join Date
    February 2012
    Location
    Nuremberg, Bavaria
    Posts
    258
    Hi, I can confirm the issue of the Pi, which @Caaruzo mentioned.

    Here is a backtrace:
    Code:
    spawn su -s /bin/bash -c cd /opt/exagear/images/debian-9/usr/local/teamspeak/teamspeak3-server_linux_x86 && export LD_LIBRARY_PATH=".:" && gdb ts3server && cd - > /dev/null - teamspeak
    GNU gdb (Raspbian 7.12-6) 7.12.0.20161007-git
    Copyright (C) 2016 Free Software Foundation, Inc.
    License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
    This is free software: you are free to change and redistribute it.
    There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
    and "show warranty" for details.
    This GDB was configured as "arm-linux-gnueabihf".
    Type "show configuration" for configuration details.
    For bug reporting instructions, please see:
    <http://www.gnu.org/software/gdb/bugs/>.
    Find the GDB manual and other documentation resources online at:
    <http://www.gnu.org/software/gdb/documentation/>.
    For help, type "help".
    Type "apropos word" to search for commands related to "word"...
    Reading symbols from ts3server...(no debugging symbols found)...done.
    (gdb) run -x start
    Starting program: /opt/exagear/images/debian-9/usr/local/teamspeak/teamspeak3-server_linux_x86/ts3server -x start
    [tcsetpgrp failed in terminal_inferior: Unpassender IOCTL (I/O-Control) für das Gerät]
    warning: Unable to find dynamic linker breakpoint function.
    GDB will be unable to debug shared library initializers
    and track explicitly loaded dynamic code.
    [tcsetpgrp failed in terminal_inferior: Unpassender IOCTL (I/O-Control) für das Gerät]
    [Inferior 1 (process 11507) exited with code 01]
    (gdb) bt
    No stack.
    (gdb)
    On this server, glibc 2.24 is installed.

    Any chance to get this fixed?

  11. #56
    Join Date
    June 2008
    Posts
    17,933
    All who reported that the server 3.8.0 /3.9.0 does not start on Linux (excludes any unsupported device with a ARM CPU)
    will get a private message with a experimental version.

    Anyone else where server is running: Please do not ask me for that version. I won't reply.
    You do not need it and you do not have any advantage with that version.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  12. #57
    Join Date
    June 2019
    Posts
    1
    Quote Originally Posted by dante696 View Post
    All who reported that the server 3.8.0 /3.9.0 does not start on Linux (excludes any unsupported device with a ARM CPU)
    will get a private message with a experimental version.

    Anyone else where server is running: Please do not ask me for that version. I won't reply.
    You do not need it and you do not have any advantage with that version.
    On me its also not working, also not the new Beta 3.9.0

    Its still not starting and it says its started and 3.7.1 works fine...
    But due the security fixes i would like to use the 3.8.0 at least.

    is there a fix out now?

  13. #58
    Join Date
    June 2008
    Posts
    17,933
    We found the the cause of that error and will hand out a new version in about 2 hours to those who reported that problem.
    You will get a private message from me.

    And if that version works we will release a new beta.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  14. #59
    Join Date
    June 2008
    Posts
    17,933
    Beta 2 is available now.

    This one does fix the problem that the server does not start on Linux!
    Get it from the release thread
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Discussion] TeamSpeak Server 3.6.x
    By dante696 in forum Suggestions and Feedback
    Replies: 31
    Last Post: March 19th, 2019, 01:58 PM
  2. [Discussion] TeamSpeak 3 Server 3.3.0 & 3.3.1
    By dante696 in forum Suggestions and Feedback
    Replies: 48
    Last Post: September 6th, 2018, 07:58 PM
  3. [Discussion] TeamSpeak 3 Server 3.2.0
    By dante696 in forum Suggestions and Feedback
    Replies: 24
    Last Post: July 19th, 2018, 09:34 AM
  4. [Discussion] TeamSpeak 3.1.1 Beta Discussion
    By Chris in forum Suggestions and Feedback
    Replies: 15
    Last Post: February 10th, 2017, 05:02 PM
  5. [Discussion] TeamSpeak 3 Server 3.0.12.*
    By Dream in forum Suggestions and Feedback
    Replies: 7
    Last Post: April 5th, 2016, 10:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •