[Discussion] TeamSpeak Server 3.8.0

[Keegan]

Hi, when i install the 3.8.0 (Linux Ubuntu 18.04.1 LTS 64-bit)
https://gyazo.com/07ca90835ac08c32f854ccdf798dccc4
it doesn't give me the 1st key for the server admin and the psw for the server admin query
It starts the TS3 server only...

Why?

[XARON]

Finally fixed high load packet loss problem.

[By-Jokese]

Just tried to update it from 3.7.0 to 3.8.0 on windows, and Seems to start but logs are just telling that virtual servers are listening on port X. But cant connect to the server, doesn't matter what client version I use (3.3.0 or previous). Aparently the logs folder on windows is not empty, but no relevant info.

Starting the previous version works, so is not a networking problem.

[Huecuva]

I have a buddy who likes to run servers, and I'm trying to convince him that Debian is better than windows for a teamspeak server. It's not going well, however.

He lives 2 hours away, and I just spent a couple of days at his place trying to set up a Debian teamspeak server on a very small barebone minipc called a Fit-PC3. I followed [HTML="https://www.digitalocean.com/community/questions/fast-easy-tutorial-setup-teamspeak-server-on-debian-9-7"]this tutorial here[/HTML] mostly, without the parts regarding the VPN. I downloaded the Linux amd64 version of the server and renamed it to TS3Server.bz2 to make installation from the terminal simpler. I then copied that file to the /home/teamspeak/ folder for the teamspeak user and ran the tar command to extract it. I then renamed the extracted folder and navigated into it and ran

touch .ts3server_licence_accepted

as that tutorial indicates, at which point something happens but it doesn't tell me what. Then I run the server with

./ts3server_startscript.sh start

at which point it says

Starting the teamspeak 3 server.
teamspeak 3 server started. For details read the log file.

or something to that effect. But it does not provide a token for admin access and I can't find whatever log file it's referring to.

[Dragon34]

Hello looking at the log this morning I noticed this <0x00>


there I think there is a small problem I just modified the file query_ip_whitelist.txt here are the log <0x00> income



I restart the problem server solved

[Al3x1337]

terminating with uncaught exception of type boost::exception_detail::clone_impl<boost::excepti on_detail::error_info_injector<boost::system::syst em_error> >: set_option: Bad file descriptor

ts3server has crashed. A crashdump has been generated at "/opt/sell/teamspeak20870/crashdumps/ts3server_3_8_0_linux_amd64_ab14-8fa4-c791-063f.dmp"
Aborted


What îs this?

[dante696]

And again i ask you to upload the crashdump. Last time you ignored this so...

[Tobiwan4]

After I updated my teamspeak server to 3.8.0, this error occurred:

2019-06-03 13:06:45.593398|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.8.0 (2019-05-27 06:32:09)
2019-06-03 13:06:45.593610|INFO    |ServerLibPriv |   |SystemInformation: Linux 3.16.0-8-amd64 #1 SMP Debian 3.16.64-2 (2019-04-01) x86_64 Binary: 64bit
2019-06-03 13:06:45.593659|INFO    |ServerLibPriv |   |Using hardware aes
2019-06-03 13:06:45.594572|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
2019-06-03 13:06:45.594625|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
2019-06-03 13:06:45.594966|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
2019-06-03 13:06:45.595276|ERROR   |DatabaseQuery |   |db_exec failed unable to open database file
2019-06-03 13:06:45.595315|ERROR   |DatabaseQuery |   |integrity_check failed unable to open database file
2019-06-03 13:06:45.595345|CRITICAL|ServerLibPriv |   |Server() DatabaseError unable to open database file

After downgrading to 3.7.1, my teamspeak server works again.

2019-06-03 13:08:54.503210|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.7.1 (2019-03-28 07:46:26)
2019-06-03 13:08:54.503377|INFO    |ServerLibPriv |   |SystemInformation: Linux 3.16.0-8-amd64 #1 SMP Debian 3.16.64-2 (2019-04-01) x86_64 Binary: 64bit
2019-06-03 13:08:54.503426|INFO    |ServerLibPriv |   |Using hardware aes
2019-06-03 13:08:54.504600|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
2019-06-03 13:08:54.504653|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
2019-06-03 13:08:54.505043|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
2019-06-03 13:08:54.557526|WARNING |Accounting    |   |Unable to open licensekey.dat, falling back to limited functionality
2019-06-03 13:08:54.557751|INFO    |Accounting    |   |Licensing Information
2019-06-03 13:08:54.557792|INFO    |Accounting    |   |licensed to       : Anonymous
2019-06-03 13:08:54.557823|INFO    |Accounting    |   |type              : No License
2019-06-03 13:08:54.557862|INFO    |Accounting    |   |starting date     : Tue Jan  1 00:00:00 2019
2019-06-03 13:08:54.557895|INFO    |Accounting    |   |ending date       : Fri Jan 31 00:00:00 2020
2019-06-03 13:08:54.557924|INFO    |Accounting    |   |max virtualservers: 1
2019-06-03 13:08:54.557953|INFO    |Accounting    |   |max slots         : 32
2019-06-03 13:08:54.691499|INFO    |              |   |myTeamSpeak identifier revocation list was downloaded successfully - all related features are activated
2019-06-03 13:08:56.485618|INFO    |              |   |Puzzle precompute time: 1893
2019-06-03 13:08:56.486089|INFO    |FileManager   |   |listening on 0.0.0.0:30033, [::]:30033
2019-06-03 13:08:56.505811|INFO    |Query         |   |listening for query on 0.0.0.0:10011, [::]:10011
2019-06-03 13:08:56.506697|INFO    |Query         |   |listening for query ssh on 0.0.0.0:10022, [::]:10022

I use Debian 8 and glib 2.19 (ldd (Debian GLIBC 2.19-18+deb8u10) 2.19).

Did I forget something to do?

I updated my teamspeak server with my script:

TS_SERVER_VERSION=3.8.0
systemctl stop ts3server
cd /tmp
wget https://files.teamspeak-services.com/releases/server/$TS_SERVER_VERSION/teamspeak3-server_linux_amd64-$TS_SERVER_VERSION.tar.bz2
tar -xjf teamspeak3-server_linux_amd64-$TS_SERVER_VERSION.tar.bz2 -C /usr/local/bin/
rm teamspeak3-server_linux_amd64-$TS_SERVER_VERSION.tar.bz2
cd ~ 
systemctl start ts3server
systemctl status ts3server

[Al3x1337]

And again i ask you to upload the crashdump. Last time you ignored this so...

I send you a private message with the crashdump

[dante696]

@ Tobiwan4
Common reason for this message:
Permissions for the user are missing or have changed.
You have reached the limit of open file handles for current user.
You are out of memory.


@ Al3x1337
Yea i see that. Forwarded it to the developers.

[dante696]

@ Al3x1337

Server 3.9.0 should fix the issue.

[Ragyal]

I am still not able to start the latest version. And I don`t think I am doing something wrong or differently than before.
Please have a look at the log of the process of installing and trying to start.

Would be nice to get a response

[Chris]

I am still not able to start the latest version. And I don`t think I am doing something wrong or differently than before.
Please have a look at the log of the process of installing and trying to start.

Would be nice to get a response

just use

./ts3server

to start the server.
If that doesn't do anything either do a

ldd ts3server

and post the output

[Ragyal]

./ts3server

does not do anything...

[email protected]:/usr/local/teamspeak3/dev/teamspeak3-server_linux_amd64$ ldd ts3server
        linux-vdso.so.1 =>  (0x00007ffe47fe4000)
        libts3_ssh.so => /usr/local/teamspeak3/dev/teamspeak3-server_linux_amd64/./libts3_ssh.so (0x00007f68bf91a000)
        libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f68bf70f000)
        librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f68bf507000)
        libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f68bf1fd000)
        libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f68befe0000)
        libstdc++.so.6 => /usr/lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007f68bec5e000)
        libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f68be893000)
        /lib64/ld-linux-x86-64.so.2 (0x00005637b2a1f000)
        libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007f68be67d000)

[presenceofmind]

I've notice new TS5 features been added to server version 3.7 and 3.8.
For a development point of view this is a very bad idea.
Let v3 continue getting updates without meshing of features with v5.
And v5 development should be on it's own branch.
Once TS5 is out, release a new server v5 with all the new features.
I'm keeping my server on v3.6 until you guys sort this out.
Cheers