Forum

Results 1 to 2 of 2
  1. #1
    Join Date
    December 2009
    Location
    Germany
    Posts
    6

    TS3-Client Crashes when run with my local Qt-4.6 installation.

    I tried running the client with my systems Qt-4.6 installation, but everything i got was a segfault.
    Here's a backtrace:

    Code:
    #0  0x00007ffff70183d8 in sm_performSaveYourself (smd=0xf37430) at kernel/qapplication_x11.cpp:5587
    #1  0x00007ffff7018649 in sm_saveYourselfCallback (smcConn=<value optimized out>, clientData=0xf3aff0, saveType=<value optimized out>, shutdown=<value optimized out>,
        interactStyle=18803840) at kernel/qapplication_x11.cpp:5536
    #2  0x00007ffff489b612 in _SmcProcessMessage (iceConn=0xeca5a0, clientData=<value optimized out>, opcode=<value optimized out>, length=1, swap=<value optimized out>,
        replyWait=<value optimized out>, replyReadyRet=0x7fffffffced8) at sm_process.c:244
    #3  0x00007ffff468b4f4 in IceProcessMessages (iceConn=0xeca5a0, replyWait=0x0, replyReadyRet=0x0) at process.c:343
    #4  0x00007ffff700e6cf in QSmSocketReceiver::qt_metacall (this=0xf37500, _c=QMetaObject::InvokeMetaMethod, _id=<value optimized out>, _a=0x7fffffffd030)
        at .moc/release-shared/qapplication_x11.moc:71
    #5  0x00007ffff7add5d3 in QMetaObject::activate (sender=0xf19d50, m=<value optimized out>, local_signal_index=<value optimized out>, argv=0x0) at kernel/qobject.cpp:3286
    #6  0x00007ffff7b291fe in QSocketNotifier::activated (this=0x7fffffffd950, _t1=12) at .moc/release-shared/moc_qsocketnotifier.cpp:89
    #7  0x00007ffff7ae47c3 in QSocketNotifier::event (this=0xf19d50, e=0x7fffffffd690) at kernel/qsocketnotifier.cpp:317
    #8  0x00007ffff6fa538c in QApplicationPrivate::notify_helper (this=0xe7c340, receiver=0xf19d50, e=0x7fffffffd690) at kernel/qapplication.cpp:4242
    #9  0x00007ffff6fadbba in QApplication::notify (this=0x7fffffffd950, receiver=<value optimized out>, e=0x7fffffffd690) at kernel/qapplication.cpp:4125
    #10 0x00007ffff7aca98b in QCoreApplication::notifyInternal (this=0x7fffffffd950, receiver=0xf19d50, event=0x7fffffffd690) at kernel/qcoreapplication.cpp:704
    #11 0x00007ffff7af418a in QCoreApplication::sendEvent (source=0xe81370) at ../../include/QtCore/../../src/corelib/kernel/qcoreapplication.h:215
    #12 socketNotifierSourceDispatch (source=0xe81370) at kernel/qeventdispatcher_glib.cpp:110
    #13 0x00007ffff4f974cd in g_main_dispatch (context=0xe80520) at gmain.c:1960
    #14 IA__g_main_context_dispatch (context=0xe80520) at gmain.c:2513
    #15 0x00007ffff4f9ae88 in g_main_context_iterate (context=0xe80520, block=<value optimized out>, dispatch=<value optimized out>, self=<value optimized out>) at gmain.c:2591
    #16 0x00007ffff4f9afb0 in IA__g_main_context_iteration (context=0xe80520, may_block=1) at gmain.c:2654
    #17 0x00007ffff7af3dd3 in QEventDispatcherGlib::processEvents (this=0xe7d8a0, flags=<value optimized out>) at kernel/qeventdispatcher_glib.cpp:407
    #18 0x00007ffff70418ee in QGuiEventDispatcherGlib::processEvents (this=0x7fffffffd950, flags=<value optimized out>) at kernel/qguieventdispatcher_glib.cpp:202
    #19 0x00007ffff7ac92e2 in QEventLoop::processEvents (this=<value optimized out>, flags=DWARF-2 expression error: DW_OP_reg operations must be used either alone or in conjuction with DW_OP_piece.
    ) at kernel/qeventloop.cpp:149
    #20 0x00007ffff7ac96b4 in QEventLoop::exec (this=0x7fffffffd8f0, flags=DWARF-2 expression error: DW_OP_reg operations must be used either alone or in conjuction with DW_OP_piece.
    ) at kernel/qeventloop.cpp:201
    #21 0x00007ffff7acd39b in QCoreApplication::exec () at kernel/qcoreapplication.cpp:981
    #22 0x000000000065e675 in ?? ()
    #23 0x00007ffff587cbbd in __libc_start_main (main=<value optimized out>, argc=<value optimized out>, ubp_av=<value optimized out>, init=<value optimized out>,
        fini=<value optimized out>, rtld_fini=<value optimized out>, stack_end=0x7fffffffdd38) at libc-start.c:220
    #24 0x000000000044a329 in ?? ()
    #25 0x00007fffffffdd38 in ?? ()
    #26 0x000000000000001c in ?? ()
    #27 0x0000000000000001 in ?? ()
    #28 0x00007fffffffe0a3 in ?? ()
    #29 0x0000000000000000 in ?? ()

    I'm on amd64 Gentoo Linux.

  2. #2
    Join Date
    September 2002
    Location
    Germany/Berlin
    Posts
    18

    Cool

    I can confirm that.

    Although, I assume that there's some BIC issues as we had something similar at our company while using some binaries compiled against Qt 4.5 but trying to run with Qt 4.6.

    Please try to upgrade to Qt 4.6 as soon as possible :-)

    Mary Christmas
    Christian.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. help in installation of ts3 client on linux
    By Ayan01 in forum General Questions
    Replies: 1
    Last Post: June 25th, 2013, 11:04 AM
  2. Replies: 1
    Last Post: November 2nd, 2012, 03:06 PM
  3. Teamspeak 3 crashes after first installation
    By khopki30 in forum Windows
    Replies: 0
    Last Post: June 18th, 2011, 09:25 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •