Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Results 1 to 3 of 3
  1. #1
    Join Date
    January 2010
    Location
    Brazil
    Posts
    3

    Unhappy consumption of network bandwidth ?

    Can anyone tell me what the consumption of bandwidth for each User's TS3 would be 150kb as I followed on my server. What consumes more? TS2 or TS3 and what the real values of each?

  2. #2
    Join Date
    December 2009
    Location
    Portugal
    Posts
    492
    Hi

    That really depends on the codec and quality selected. The max codec in TS2 should be around 3.2KB/s...for TS3 you can just open the client and see the estimate bandwidth when you edit a channel.

    Regards

  3. #3
    Join Date
    May 2007
    Location
    Eastern NC
    Posts
    1,801
    Not sure if this will help. But I understand it like this, if I'm way off base let me know.

    B = bandwidth
    U = users connected
    K = users keyed up

    The incoming bandwith is easy: B * K
    Outgoing is not that hard either: (U - 1) * B * K reason for the minus 1 is that the talker's stream is not sent back to him/her


    First lets you have 3 users and 1 talking with estimated bitrate at 19.59 (CELT Mono/10):
    incoming need is 19.59 = (19.59 * 1)
    out going need is 39.18 = (3 - 1) * 19.59 * 1

    Now lets change that to 50 users with 3 talking with an estimated bitrate of 5 (Speex Wideband/7)
    Incoming need is 15 = (5 * 3)
    out going need is 735 = (50 - 1) * 5 * 3

    Keep in mind there are other little bits for management outside the audio streams that increase the bandwidth some too.

    Also this is per channel and the variables for each channel are likely to be different. But you can do that math for each channel and sum the results for a server total. If you want to know the max bandwidth the server could use, just use the max clients setting for the channel for the values of users (U) and users keyed up (K). Unlikely all would key up, but is possible.
    Last edited by Screech; January 20th, 2010 at 04:36 PM. Reason: channel comment

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [On Todo] High power consumption
    By lronicks in forum macOS
    Replies: 2
    Last Post: February 17th, 2015, 11:18 AM
  2. [Resolved] server TS3 in small network - access from out of local network
    By Marcin82w in forum Server Support
    Replies: 3
    Last Post: November 12th, 2013, 04:10 PM
  3. Controlling bandwitch consumption
    By Morfi in forum Server Support
    Replies: 5
    Last Post: June 9th, 2011, 03:43 AM
  4. TS3 vs TS2 Bandwith Consumption (lag)
    By Flow_ in forum Server Support
    Replies: 13
    Last Post: June 3rd, 2011, 12:48 PM
  5. Beta 21 Windows 7 High CPU Consumption
    By Mightymod in forum Windows
    Replies: 8
    Last Post: June 6th, 2010, 10:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •