Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Page 96 of 140 FirstFirst ... 46869495969798106 ... LastLast
Results 1,426 to 1,440 of 2094
  1. #1426
    Join Date
    September 2014
    Posts
    1

    Auto move users that sit in a channel for too long?

    I have a lot of users in my Teamspeak that like to sit in the lobby. This is incredibly annoying and bothers many other users in the Teamspeak, but those users continue to do it. It's not something to ban the users over, as we are all friends. However, I was wondering there was a way to have my server automatically move users that sit in the default channel for maybe more than 5-10 minutes into a different channel?

    Thanks in advance.

  2. #1427
    Join Date
    June 2011
    Location
    Germany
    Posts
    4,368

  3. #1428
    Join Date
    December 2009
    Location
    Germany
    Posts
    2,360
    Quote Originally Posted by TheKindlyMan View Post
    I have a lot of users in my Teamspeak that like to sit in the lobby. This is incredibly annoying and bothers many other users in the Teamspeak, but those users continue to do it. It's not something to ban the users over, as we are all friends. However, I was wondering there was a way to have my server automatically move users that sit in the default channel for maybe more than 5-10 minutes into a different channel?
    Almost possible with my JTS3ServerMod, function is named AutoMove. But it is moving people based on the Server Group instant after connecting.

  4. #1429
    Join Date
    January 2014
    Posts
    86
    Helo,

    how (multiple use possible) with ChannelNotify.

    for example.
    I have 3 channels.
    ID=1,ID=2,ID=3
    How to make the bot posted three different texts on three different channels?

    Regards

  5. #1430
    Join Date
    December 2009
    Location
    Germany
    Posts
    2,360
    Quote Originally Posted by dziudziu View Post
    how (multiple use possible) with ChannelNotify.
    [...]
    How to make the bot posted three different texts on three different channels?
    Use
    Code:
    bot_functions = ChannelNotify:ExampleName1,ChannelNotify:ExampleName2,ChannelNotify:ExampleName3
    and start the bot with the -updateconfig argument: java -jar JTS3ServerMod.jar -updateconfig

    Reopen the config file and fill out the needed information. To have different messages, make sure that you set a different messages file for each Channel Notify.

  6. #1431
    Join Date
    January 2014
    Posts
    86
    Thanks )))))

    and channelnotify2_file = config/channelnotifymessages2.cfg ??? its correct?
    I'd like to 3 different messages

  7. #1432
    Join Date
    December 2009
    Location
    Germany
    Posts
    2,360
    Quote Originally Posted by dziudziu View Post
    Thanks )))))

    and channelnotify2_file = config/channelnotifymessages2.cfg ??? its correct?
    I'd like to 3 different messages
    Try it, write if still something is unclear.

  8. #1433
    Join Date
    January 2014
    Posts
    86
    Look:

    ChannelNotify:channelnotify,ChannelNotify:channeln otify2



    # Channel id that should be watched for new clients. You can only set one channel id here!
    channelnotify_channel_id = 99
    # A comma separated list (without spaces) of server group ids.
    # Depends on the given mode, this server groups can be ignored or only this server groups will be watched!
    # If no server groups should be ignored, set no server groups here and select the group list mode ignore!
    channelnotify_group_list =
    # Select one of the two modes for the server group list.
    # ignore = The selected server groups will be ignored.
    # only = Send a notify message only if the selected server groups join the channel.
    channelnotify_group_list_mode = ignore
    # A comma separated list (without spaces) of server group ids, which should be notified about new clients in the specified channel.
    channelnotify_grouptargets = 49
    # A comma separated list (without spaces) of channel ids.
    # Depends on the given mode, target clients in this channels can be ignored or only clients in this channels receive the notify message!
    # If no channels should be ignored, set no channels here and select the channel list mode ignore!
    channelnotify_channel_list =
    # Select one of the two modes for the channel list.
    # ignore = Clients in the selected channels will be ignored.
    # only = Only clients in the selected channels receive the notify message.
    channelnotify_channel_list_mode = ignore
    # Select the message mode, how the notified clients should get the message.
    # poke or chat are valid values!
    channelnotify_message_mode = poke
    # Select the message mode, how the clients (who joined the channel) should get the message.
    # poke, chat or none are valid values!
    channelnotify_messagenotified_mode = poke
    # Path to file which contains the channel notify message
    channelnotify_file = config/channelnotifymessages.cfg

    # Channel id that should be watched for new clients. You can only set one channel id here!
    channelnotify_channel_id2 = 100
    # A comma separated list (without spaces) of server group ids.
    # Depends on the given mode, this server groups can be ignored or only this server groups will be watched!
    # If no server groups should be ignored, set no server groups here and select the group list mode ignore!
    channelnotify_group_list2 =
    # Select one of the two modes for the server group list.
    # ignore = The selected server groups will be ignored.
    # only = Send a notify message only if the selected server groups join the channel.
    channelnotify_group_list_mode2 = ignore
    # A comma separated list (without spaces) of server group ids, which should be notified about new clients in the specified channel.
    channelnotify_grouptargets2 = 49
    # A comma separated list (without spaces) of channel ids.
    # Depends on the given mode, target clients in this channels can be ignored or only clients in this channels receive the notify message!
    # If no channels should be ignored, set no channels here and select the channel list mode ignore!
    channelnotify_channel_list2 =
    # Select one of the two modes for the channel list.
    # ignore = Clients in the selected channels will be ignored.
    # only = Only clients in the selected channels receive the notify message.
    channelnotify_channel_list_mode2 = ignore
    # Select the message mode, how the notified clients should get the message.
    # poke or chat are valid values!
    channelnotify_message_mode2 = poke
    # Select the message mode, how the clients (who joined the channel) should get the message.
    # poke, chat or none are valid values!
    channelnotify_messagenotified_mode2 = poke
    # Path to file which contains the channel notify message
    channelnotify_file2 = config/channelnotifymessages2.cfg


    First funcion is correct but 2nd is incorrect.

  9. #1434
    Join Date
    December 2009
    Location
    Germany
    Posts
    2,360
    Quote Originally Posted by dziudziu View Post
    First funcion is correct but 2nd is incorrect.
    Because you didn't used the -updateconfig argument, like I wrote above...

    Don't add the number 2 to the end, you have to use the name from botfunctions as prefix.

    You chose the names:
    channelnotify
    channelnotify2

    So this are the both prefixes for _channel_id, _file and so on.

    Example:
    channelnotify_channel_id
    channelnotify_file
    channelnotify2_channel_id
    channelnotify2_file
    Of course all other keywords too.

  10. #1435
    Join Date
    January 2014
    Posts
    86

  11. #1436
    Join Date
    December 2009
    Location
    Germany
    Posts
    2,360
    Quote Originally Posted by dziudziu View Post
    Channel Notify message for the watched client (if no target group client is online) missing in config!
    Are you sure that the file config/channelnotifymessages2.cfg contains three messages? If you are sure, post that file, please.

  12. #1437
    Join Date
    January 2014
    Posts
    86
    Hi,

    look: http://wklej.org/id/1471898/

    Regards,
    Grzegorz

  13. #1438
    Join Date
    December 2009
    Location
    Germany
    Posts
    2,360
    Quote Originally Posted by dziudziu View Post
    Please send me all config and log files to my mail account (of course you can remove the query password from config file first).

  14. #1439
    Join Date
    January 2014
    Posts
    86
    link for my config: http://www.speedyshare.com/zn2rq/bot.rar

    Stefan1200 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
    I not found an e-mail

    Regards

  15. #1440
    Join Date
    December 2009
    Location
    Germany
    Posts
    2,360
    Quote Originally Posted by dziudziu View Post
    It's working here with your files, no problems. Please check if your file channelnotifymessages2.cfg really has the Test3 line, maybe add some empty lines below it. I don't know. Its working here, and I was using your channelnotifymessages2.cfg file and most of your JTS3ServerMod_server1.cfg settings.


    Quote Originally Posted by dziudziu View Post
    I not found an e-mail
    On top of the readme.txt file of the bot, first post in this forum thread or on my website

Thread Information

Users Browsing this Thread

There are currently 7 users browsing this thread. (0 members and 7 guests)

Similar Threads

  1. [No Bug] Idle Time even thou people are not idle.
    By brewek in forum Bug Reports [EN/DE]
    Replies: 3
    Last Post: November 10th, 2011, 04:27 PM
  2. [Resolved] JTS3ServerMod server query permission help
    By n406c in forum Permission System
    Replies: 2
    Last Post: April 1st, 2011, 11:08 PM
  3. Replies: 4
    Last Post: January 9th, 2011, 03:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •