Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Results 1 to 11 of 11
  1. #1
    Join Date
    August 2002
    Location
    Pennsylvania
    Posts
    26

    Any chance of an ARM port?

    This thread is outdtaed
    Discussion etc -> http://forum.teamspeak.com/threads/4...3-linux-server



    I have been moving all my home server functions over to the Plug PC. Can't beat 2-5 watts of power usage for a server ;-) and I get to turn off my PC at night!

    Plug PCs run on ARM processors. I was about to setup a Qemu Intel virtual machine to run TeamSpeak 3 server for me when I figured I'd just ask:

    Is there any chance of a server native port for ARM processors?

    http://www.globalscaletechnologies.c...guruplugs.aspx
    Last edited by dante696; June 6th, 2016 at 07:23 AM.

  2. #2
    Join Date
    March 2010
    Location
    Sweden
    Posts
    1

    ARM port

    I would love to have a arm porting of teamspeak.
    I use a NAS that have an Arm processor in it and It would really be great if we could have a teamspeak server running for me and my friend.

  3. #3
    Join Date
    March 2010
    Location
    Sweden
    Posts
    1

    Teamspeak3 server for ARM CPU

    Thanks for a brilliant product!
    I have a wish to use TS3 on my QNAP TS209 II Pro.
    Are there any future plans to extend TS3 to work on ARM CPU's (which my QNAP is based on)?

  4. #4
    Join Date
    March 2009
    Location
    The Netherlands
    Posts
    4
    Would love to have ts 2 or ts 3 on my qnap ts119?

    Cmon teamspeak

    Respond

  5. #5
    Join Date
    October 2008
    Location
    Indiana, US
    Posts
    2
    I would really love to my TeamSpeak server to my DroboFS. But, it too uses ARM. So here I am requesting an ARM port.

  6. #6
    Join Date
    January 2011
    Location
    Canberra, Australia
    Posts
    2
    I'm also in support of this, in hopes of getting TS3 on my phone (Nokia N900).

  7. #7
    Join Date
    July 2003
    Location
    Leusden, the Nederlands
    Posts
    6

    Question TS3 on linux with ARM architecture.

    I have a smal server (qnap ts-209) which has ARM architecture.

    Installing TS3 for linux on ARM architecture gives problems.
    Do you know how we can make it work on ARM architecture ?
    I have seen a lot of same questions in qnap or synology forums, so i guess more people are looking for the same solution. Till so far, i have not found a way to get i working.

    Regards,
    Hans

  8. #8
    Join Date
    July 2006
    Location
    Glen Allen VA
    Posts
    13
    Searched on "arm" Get "Sorry - no matches. Please try some different terms."

  9. #9
    Join Date
    June 2008
    Posts
    18,513
    There is no real answer and nobody from our developers has discussed about arm support.
    I guess there won't be any arm port for this year.
    Last edited by dante696; January 18th, 2012 at 07:05 AM.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  10. #10
    Join Date
    August 2002
    Location
    Pennsylvania
    Posts
    26
    I understand. I tried adding -march=armv4 and it made things so much worse.

  11. #11
    Join Date
    July 2006
    Location
    Glen Allen VA
    Posts
    13
    guess I need to learn to code so I can port it over :-/

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Resolved] Chance the looks of the teamspeak
    By tigertjheu in forum General Questions
    Replies: 1
    Last Post: January 10th, 2016, 06:14 AM
  2. [Resolved] How to set Password after missing first chance
    By schemer in forum Server Support
    Replies: 9
    Last Post: March 2nd, 2011, 02:29 PM
  3. [On Todo] 3.1 little chance in log
    By Denniminator in forum Suggestions and Feedback
    Replies: 4
    Last Post: January 28th, 2011, 07:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •