Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Results 1 to 7 of 7
  1. #1
    Join Date
    May 2010
    Location
    Germany
    Posts
    4

    Question User with Group and Channel

    I would like to enter a server group is a channel as possible in TeamSpeak 2 was without this extra need to enter a password.

    Example:

    Gilde_1 should be able to go from the entrance to the channel Gilde_1 and the open channel, but not in the channel and sub channel Gilde_2

    Gilde_2 should be able to go from the entrance hall in the channel Gilde_2 and the open channel, but not in the channel and sub channel Gilde_1

    Because the rights "Join-Power" and "needed Join-Power" is that not possible. I hope any one can help me.

    thx Phoenyx

    *** german part deleted ***
    *** This forum is english only! ***
    Last edited by dante696; September 2nd, 2010 at 02:59 PM.

  2. #2
    Join Date
    January 2010
    Location
    Catalunya
    Posts
    2,350
    1-
    Channel Permission > [Your Channels] > Channel > Acces > i_channel_needed_join_power = 55

    [Your Channels] = Gilde_1 / subGilde_1 / Gilde_2 / subGilde_2

    2-
    go to Channel Groups and create e new group eg: ChAcOn

    ChAcOn > Channel > Acces > i_channel_join_power = 55

    3-

    SA must be drag each user to Gilde_1 or Gilde_2, and assign each one to Group ChAcOn.

    It is not necessary to do so subGilde_2 or subGilde_1

  3. #3
    Join Date
    May 2010
    Posts
    6,310

  4. #4
    Join Date
    May 2010
    Location
    Germany
    Posts
    4

    Question

    Thx for Help

    But now i have next question???

    I have 5 Gilde on Server and i dont want that CA from Guild 1 can kick Member from Guild 2 for Exampel

    same for Guild Channel CA from Guild 1 cant rename Channel from Guild 2

    Excuse my bad English

  5. #5
    Join Date
    February 2006
    Location
    Texas, USA
    Posts
    4,143

  6. #6
    Join Date
    January 2010
    Location
    Secret Base in Arctic Region
    Posts
    1,671
    Also, channelgroups are bound to that channel.
    So, a CA from Channel 1 cant kick an user from Channel 2 (unless he has CA there too).

  7. #7
    Join Date
    May 2010
    Location
    Germany
    Posts
    4

    Question

    First Thanks all for Help and Patience.

    Finally i have found a way to realisize 5 Guild over Channel Groups but the Prob is now that the Guild CA (Leader) cant join channel the from his self createt.

    Exampel:

    Channel Guild 1
    == Instanz 1 (Createt from me SA)
    == Instanz 2 (Createt from Guild CA)

    All Guild Member (Channel Group) can Join the 2 Channel but Guild CA ( Channel Group ) cant Join Channel Instanz 2 .

    I have set the needed Join Power 10 and Member and CA have 15 and 20 Join Power. I think the Prob is that Guild CA have standart ChannelGroup Channel Admin when he Createt a Channel.

    It's enough to drive one to despair. The Administration from TS3 is not funny.

    Please Help

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Delete channel when a certain user group isn't in it
    By DeadPoolTs in forum Permission System
    Replies: 1
    Last Post: June 5th, 2015, 10:31 AM
  2. Add user in channel group after he creates channel
    By Freakmeister in forum Permission System
    Replies: 1
    Last Post: September 1st, 2013, 11:29 PM
  3. Replies: 4
    Last Post: July 16th, 2012, 12:55 PM
  4. [No BUG] Channel Admin after set to Group: User
    By Phil7789 in forum Bug Reports [EN/DE]
    Replies: 7
    Last Post: June 22nd, 2010, 11:20 AM
  5. Assign non-default channel group when user joins channel.
    By Morfi in forum Permission System
    Replies: 0
    Last Post: May 15th, 2010, 08:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •