Change Voice, Filetransfer or Query port

[Randomguy9987]

Well to change the port you need to use the server query interface, which is telnet based. As such you will need a telnet client.
Putty is (one of, if not the) the most used one for Windows, which is why you keep seeing it. You can also enable/install the one that comes with Windows if you prefer.

In any case to change the port of your existing virtual server:

Connect putty to your server on the query port (default 10011) and then run these commands:

login serveradmin PASSWORD
use port=9987
serveredit virtualserver_port=9999
serverprocessstop

After that, just start your server again.
You will have to replace PASSWORD with the actual password that you received when you first created your TeamSpeak Instance. If you do not remember the password anymore, please see this knowledgebase article.

Thanks, that makes sense. We'll just activate the Windows Telnet client since it is simple to do. However, I'm not sure how to connect to our server through it. Is there a guide for that somewhere?

[dante696]

Is there a guide for that somewhere?

Yes there is a full guide in post #2 in this thread.

[Chris]

However, I'm not sure how to connect to our server through it. Is there a guide for that somewhere?

Well it is as simple as opening a command window (Press Windows Key and the R key simultaneously [Win+R]. In the Box that appears type cmd and hit Enter). Once there simply enter the following:

telnet 1.2.3.4 10011

Where 1.2.3.4 is your server ip. You should see the TeamSpeak 3 Server Query Greeting message and the rest is the same as with any other telnet client.

[taze_]

Hi there
First of all: Sorry it this gets asked a lot but in my defense: yes I used the search option in the forum AND google.. but.. it just does not work. I even read the whole doc file and welp.. no luck.
However, feel free to merge my thread.

Soo.. I connect to my server via Putty, login with my serveradmin login and try to change my default port from 9988 to 9987.

I stop the server, serveredit it to 9987 and restart... BUT.. it still runs on 9988;

TS3
Welcome to the TeamSpeak 3 ServerQuery interface, type "help" for a list of commands and "help <command>" for information on a specific command.
login serveradmin xxxxxxxx
error id=0 msg=ok
serverstop sid=1
error id=0 msg=ok
serveredit b_virtualserver_modify_port=9987
error id=0 msg=ok
serverstart sid=1
error id=0 msg=ok

My client is running in the background so I hear the server shutting down and my client connecting to [ip]:9988 right after I restart the server, so I assume the change never got saved.

There are other threads in this forum suggesting to use "serveredit virtualserver_port=<port_number>" but..:

.
.
login serveradmin xxxxxxxx
error id=0 msg=ok
serverstop sid=1
error id=0 msg=ok
serveredit virtualserver_port=9987
error id=1538 msg=invalid\sparameter

I rly don't get it. Also most of the posts were from between 2008 and 2011.

thanks in advance and again sorry if this gets asked a lot

E//

Jesus.. I don't know if I should feel dumb.. or if this whole query thing is just way to complicated or not enough documented:
The way I finally got it to work is this -> Connect via putty and enter this:

login serveradmin <password>
use port=<my_old_port>
serveredit virtualserver_port=<my_new_port>
serverprocessstop

After that just restart the server.

Welp.. mods, you can close this. I show myself out..

[Juggelix]

My linux server not start
Is there some way change that tcp port? That 10022.

ERROR   |              |   |could not bind listening tcp socket on 0.0.0.0 : 10022 Address already in use

Edit by mod
As written more than once. please read the how to in my post #2

[tuvok1981]

Hello,
gives for a .ini File entry to change the query SSH Port 10022?

[Alexandru_Andrei]

good evening is it possible to change the query port?
on VPS Linux

[fabm3n]

Read Post #2

[tommy45]

I have a similar question but one of the links no longer works, i only run 1 server but due to some type of bot net activity that my Av has blocked on port 30033 the file trans fare port i wish to change the port to mitigate these attacks,i set this server up years ago and don't have the server privilege key ect, to use the telnet method, i tried using the free server admin app Yatqa but the normal server admin login doesn't have the permissions so it throws an error, so if i create a ini file via the ts shortcut (Win 7) what txt is required to change the port? that's assuming it can be done in the same way as changing the query port can be,?

[dante696]

I merged the thread and you now will find the answer in post #2.
Yes with the uni file you can do this (details in post #2)