Forum

Results 1 to 11 of 11
  1. #1
    Join Date
    July 2011
    Posts
    8

    Client 14876: "logitech G35" Can't Hear after update from RC2

    hello,

    i had to register also here , because i have the same problems
    after the update i cant head what other guys talking, but they are abble to hear what i say
    my client log shows this one

    27.07.2011 13:48:26 Info Logging started, clientlib version: 3.0.0 [Build: 14876]
    27.07.2011 13:48:27 Direct Sound Debug setting timer resolution to 1ms
    27.07.2011 13:48:27 SoundBckndIntf Info Load Library failed with errorno 126

    and

    27.07.2011 13:48:34 Direct Sound Warning RenderDeviceContext::int_processData Loop proc time: 44 msecs
    27.07.2011 13:48:34 Direct Sound Warning RenderDeviceContext::int_processData outerLoop proc (3) time: 79 msecs

    im using Logitech G35 headset
    OS: Windows Xp pro

  2. #2
    Join Date
    June 2002
    Location
    Netherlands
    Posts
    1,049
    What is your speaker setup? Just normal 2 channel sound, or surroundsound?

  3. #3
    Join Date
    July 2011
    Posts
    8
    can use both but mostly using surroundsound

  4. #4
    Join Date
    June 2008
    Posts
    18,248
    I can't reproduce it on XP.

    Do you start your computer it with stereo mode? It's always 7.1 in your system but maybe this is the reason.
    Is your driver version "1.01.178" ?
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  5. #5
    Join Date
    July 2011
    Posts
    8
    Do you start your computer it with stereo mode?
    yes

    Is your driver version "1.01.178" ?
    yes

    --------------------
    UPDATE

    please close this thread because i already fixed it
    did a computer reboot, and it seemed to fixed it

    thnaks
    Last edited by tommy_9099; July 27th, 2011 at 03:49 PM. Reason: problem fixed

  6. #6
    Join Date
    July 2011
    Posts
    8
    but aldoh, my problem is fixed, i still have this error on my client log

    27.07.2011 16:45:22 Direct Sound Warning RenderDeviceContext::int_processData m_DS->m_Callbacks.getPlaybackData time 24 msecs
    27.07.2011 16:45:22 Direct Sound Warning RenderDeviceContext::int_processData outerLoop proc (3) time: 46 msecs
    27.07.2011 16:45:22 PreProSpeex Info Speex version: speex-1.2beta3
    27.07.2011 16:45:22 Direct Sound Warning RenderDeviceContext::int_processData Loop proc time: 83 msecs
    27.07.2011 16:45:23 Direct Sound Warning RenderDeviceContext::int_processData outerLoop proc (3) time: 111 msecs

    is that in my end or something wrong with TS

  7. #7
    Join Date
    June 2002
    Location
    Netherlands
    Posts
    1,049
    Those warnings indicate that getting sound data from ts3 to play on the speakers is taking too long. It should take a few msecs (like less than 10). If you get it one or twice a session, its not a big deal. If you get it a lot, you probably also hear a lot of strange noises from ts3 (sound artifacts).

    Im guessing that you have a relatively old cpu and that you get the errors while you are gaming, or doing something else cpu intensive. If not, there might be something wrong

  8. #8
    Join Date
    July 2011
    Posts
    1
    Hi,

    I've also had problems after doing the update today, and im also on the G35.
    Everything in windows had audio, except for TS. I switched a few USB devices and then it picked it up, which seemed rather odd to say the least. Then i went off for about 20min, came back and yet again it'd lost audio, hadnt disconnected or even muted anything in TS.

    Rebooted, messed about, tried different USB ports, and only 1 thing fixed it - Uninstalling it and going to 14642.

    I was able to talk and be heard, but i couldnt hear anything TS had to say, either from the join msg, people talking to me, or the audio test in the output config. Yet everything else in windows was playing through to the headphones just fine.

  9. #9
    Join Date
    July 2011
    Posts
    8
    actually i'm getting those lines quite allot
    i tried to even paste it here,m to the thread but u guys have 20000 letter limit witch is lucky, because i had over 200000

    CPU what i'm using is Intel E8400 3Ghz dual core

    i dont know how it helps u guys but latest update has been screwing up my sound again, sometimes i head , sometimes not
    but what i do is when i dont head then i tap that mute/unmute button what on side of the headphones,
    that seems to fix it, but seems , it doe sent seems to fix it correctly, because it some point, the sound is gone again

  10. #10
    Join Date
    June 2002
    Location
    Netherlands
    Posts
    1,049
    what os are you using tommy? XP? What plugins do you have enabled? If you have the overlay plugin enabled, try to see if disabling that works.

  11. #11
    Join Date
    July 2011
    Posts
    8
    yes indeed im using win xp pro with sp3 installed

    in plugins i'm using appscanner, clientquery, and voluma control
    i mean those have little X in front and i can hit settings
    rest of them are also there, ut Settings button are gray, so i guess those are disabled

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 2
    Last Post: July 8th, 2015, 11:39 AM
  2. "Failed to query latest client version from update server"
    By PotaBlava in forum General Questions
    Replies: 2
    Last Post: August 26th, 2014, 05:22 PM
  3. Please Update this Plugin ""Connection History"" Or Include to Client Version
    By varela1george in forum Suggestions and Feedback
    Replies: 2
    Last Post: October 13th, 2012, 08:28 AM
  4. [Resolved] Client 14876: "Realtek" Can't Hear with 5.1 setup
    By DvdRom in forum Bug Reports [EN/DE]
    Replies: 7
    Last Post: August 20th, 2011, 11:00 PM
  5. [Resolved] Client: RC1,2 and Final. "Can't Talk or Hear"
    By katsumeragi in forum Windows
    Replies: 79
    Last Post: August 17th, 2011, 07:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •