Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Results 1 to 3 of 3
  1. #1
    Join Date
    October 2011
    Location
    Michigan, USA
    Posts
    2

    Rookie needs help installing and staring a TS3 server remotely

    First I apologize if there is a thread out there that may be the answer to my problem… I personally have never had experience installing a TS3 server let alone use Linux or a remote shell. My server company recently put my club on its own virtual server so that I may manage and update the TS3 server as the software evolves.

    So, once I got access to the server via the information provided to me by the host and using specific software they recommended (freeware) I was able to gain access. I then searched the net and found the below link on you tube for installing the server side software:

    http://youtu.be/j8SgpKjK__Q

    I have followed this video up to the point where he instructs on starting the server for the first time using the command:

    ./ts3server_linux_x86 inifile=ts3server.ini


    It goes through its paces and I end up with the following error:

    2011-10-12 17:40:29.046991|INFO |ServerLibPriv | | Server Version: 3.0.0 [Build: 14957], Linux
    2011-10-12 17:40:29.047369|INFO |DatabaseQuery | | Please make sure you use the supplied ts3server_minimal_runscript.sh to run the server, or set LD_LIBRARY_PATH yourself
    2011-10-12 17:40:29.047477|CRITICAL|DatabaseQuery | | unable to load database plugin library "lib.so", halting!


    I have tried running the “minimal_runscript.sh” as mentioned above and get the following:


    [~/teamspeak3-server_linux-x86]# ./ts3server_minimal_runscript.sh
    TeamSpeak Server 3.0.0 [Build: 14957]
    (c)TeamSpeak Systems GmbH

    Logging started
    2011-10-12 17:35:15.826721|INFO |ServerLibPriv | | Server Version: 3.0.0 [Build: 14957], Linux
    2011-10-12 17:35:15.827107|INFO |DatabaseQuery | | dbPlugin name: SQLite3 plugin, Version 2, (c)TeamSpeak Sys tems GmbH
    2011-10-12 17:35:15.827209|INFO |DatabaseQuery | | dbPlugin version: 3.7.3
    2011-10-12 17:35:15.827587|INFO |DatabaseQuery | | checking database integrity (may take a while)
    2011-10-12 17:35:15.856871|INFO |SQL | | db_CreateTables() tables created

    ------------------------------------------------------------------
    I M P O R T A N T
    ------------------------------------------------------------------
    Server Query Admin Acccount created
    loginname= "serveradmin", password= "************"
    ------------------------------------------------------------------

    2011-10-12 17:35:16.992443|INFO |Accounting | | Licensing Information
    2011-10-12 17:35:16.992609|INFO |Accounting | | type : Non-profit
    2011-10-12 17:35:17.005139|INFO |Accounting | | starting date : Sun Feb 6 00:00:00 2011
    2011-10-12 17:35:17.005270|INFO |Accounting | | ending date : Mon Feb 6 00:00:00 2012
    2011-10-12 17:35:17.005333|INFO |Accounting | | max virtualservers: 10
    2011-10-12 17:35:17.005390|INFO |Accounting | | max slots : 512
    2011-10-12 17:35:17.022062|INFO |FileManager | | listening on 0.0.0.0:30033
    2011-10-12 17:35:17.025552|INFO |VirtualSvrMgr | | executing monthly interval
    2011-10-12 17:35:17.025725|INFO |VirtualSvrMgr | | reset virtualserver traffic statistics
    2011-10-12 17:35:17.641730|INFO |VirtualServer | 1| listening on 0.0.0.0:9987
    2011-10-12 17:35:17.642373|INFO |VirtualServer | 1| client 'server'(id:0) added privilege key for servergroup 'Se rver Admin'(id:6)
    2011-10-12 17:35:17.642512|WARNING |VirtualServer | 1| --------------------------------------------------------
    2011-10-12 17:35:17.642638|WARNING |VirtualServer | 1| ServerAdmin privilege key created, please use the line below
    2011-10-12 17:35:17.642726|WARNING |VirtualServer | 1| token=*******************
    2011-10-12 17:35:17.642820|WARNING |VirtualServer | 1| --------------------------------------------------------

    ------------------------------------------------------------------
    I M P O R T A N T
    ------------------------------------------------------------------
    ServerAdmin privilege key created, please use it to gain
    serveradmin rights for your virtualserver. please
    also check the doc/privilegekey_guide.txt for details.

    token=***********************
    ------------------------------------------------------------------

    2011-10-12 17:35:17.662134|INFO |CIDRManager | | updated query_ip_whitelist ips: 127.0.0.1,
    2011-10-12 17:35:17.662801|INFO |Query | | listening on 0.0.0.0:10011
    I M P O R T A N T
    ------------------------------------------------------------------
    Server Query Admin Acccount created
    loginname= "serveradmin", password= "******************"
    ------------------------------------------------------------------

    2011-10-12 17:35:16.992443|INFO |Accounting | | Licensing Information
    2011-10-12 17:35:16.992609|INFO |Accounting | | type : Non-profit
    2011-10-12 17:35:17.005139|INFO |Accounting | | starting date : Sun Feb 6 00:00:00 2011
    2011-10-12 17:35:17.005270|INFO |Accounting | | ending date : Mon Feb 6 00:00:00 2012
    2011-10-12 17:35:17.005333|INFO |Accounting | | max virtualservers: 10
    2011-10-12 17:35:17.005390|INFO |Accounting | | max slots : 512
    2011-10-12 17:35:17.022062|INFO |FileManager | | listening on 0.0.0.0:30033
    2011-10-12 17:35:17.025552|INFO |VirtualSvrMgr | | executing monthly interval
    2011-10-12 17:35:17.025725|INFO |VirtualSvrMgr | | reset virtualserver traffic statistics
    2011-10-12 17:35:17.641730|INFO |VirtualServer | 1| listening on 0.0.0.0:9987
    2011-10-12 17:35:17.642373|INFO |VirtualServer | 1| client 'server'(id:0) added privilege key for servergroup 'Se rver Admin'(id:6)
    2011-10-12 17:35:17.642512|WARNING |VirtualServer | 1| --------------------------------------------------------
    2011-10-12 17:35:17.642638|WARNING |VirtualServer | 1| ServerAdmin privilege key created, please use the line below
    2011-10-12 17:35:17.642726|WARNING |VirtualServer | 1| token=********************************
    2011-10-12 17:35:57.751094|INFO |ServerMain | | Received signal SIGINT, shutting down.
    2011-10-12 17:35:57.804541|INFO |VirtualServer | 1| stopped



    I followed through the video and have tried to restart the server and now I get the following:


    ******.net [~/teamspeak3-server_linux-x86]# ps x
    PID TTY STAT TIME COMMAND
    9413 ? S 0:00 pure-ftpd (IDLE)
    17699 ? S 0:00 sshd: [email protected]/0
    17797 ? S 0:00 -jailshell
    26387 ? R+ 0:00 ps x
    ******.net [~/teamspeak3-server_linux-x86]# ./ts3server_linux_x86 inifile=ts3server.ini
    TeamSpeak Server 3.0.0 [Build: 14957]
    (c)TeamSpeak Systems GmbH

    Logging started
    2011-10-12 17:40:29.046991|INFO |ServerLibPriv | | Server Version: 3.0.0 [Build: 14957], Linux
    2011-10-12 17:40:29.047369|INFO |DatabaseQuery | | Please make sure you use the supplied ts3server_minimal_runscript.sh to run the server, or set LD_LIBRARY_PATH yourself
    2011-10-12 17:40:29.047477|CRITICAL|DatabaseQuery | | unable to load database plugin library "lib.so", halting!
    ******.net [~/teamspeak3-server_linux-x86]# ls
    ./ LICENSE libts3db_mysql.so* logs/ serverkey.dat ts3server.ini ts3server_minimal_runscript.sh*
    ../ doc/ libts3db_sqlite3.so* query_ip_blacklist.txt serverquerydocs/ ts3server.sqlitedb ts3server_startscript.sh*
    CHANGELOG files/ licensekey.dat query_ip_whitelist.txt sql/ ts3server_linux_x86* tsdns/
    ******.net [~/teamspeak3-server_linux-x86]# ./ts3server_linux_x86 inifile=ts3server.ini
    TeamSpeak Server 3.0.0 [Build: 14957]
    (c)TeamSpeak Systems GmbH

    Logging started
    2011-10-12 17:44:32.137017|INFO |ServerLibPriv | | Server Version: 3.0.0 [Build: 14957], Linux
    2011-10-12 17:44:32.137267|INFO |DatabaseQuery | | Please make sure you use the supplied ts3server_minimal_runscript.sh to run the server, or set LD_LIBRARY_PATH yourself
    2011-10-12 17:44:32.137339|CRITICAL|DatabaseQuery | | unable to load database plugin library "libts3db_sqlite3.so", halting!



    As mentioned I am totally non-hacker to LINUX and the server side of TS3 and have no clue what I am doing to this point, it amazes me that I have gotten this far now and give credit to the author of the video I have been using. I do have the NPL 10virtual server/512 connection license just for FYI but I am only trying to get one server up and running and I have the ts3server.ini file with the proper IP addresses uploaded as well.

    Is there anyone out there that can point me in the right direction or tell what I am doing right/wrong or a fix I would greatly appreciate it a lot. I do have the token and passwords from above; I merely removed them for security reasons. Thank you ahead of time!

    Respectfully,

    Robert P.
    Last edited by lpd4005; October 14th, 2011 at 01:40 AM.

  2. #2
    Join Date
    May 2010
    Posts
    6,310
    Hello

    First NEVER use this binary ./ts3server_linux_x86

    As it's write in the documentation :
    Quote Originally Posted by TeamSpeak 3 Server Quick Start.txt
    Example (On Screen):
    $ tar xzf teamspeak3-server-linux_x86.tar.gz
    $ cd teamspeak3-server-linux_x86
    $ ./ts3server_minimal_runscript.sh

    Example (Background):
    $ tar xzf teamspeak3-server-linux_x86.tar.gz
    $ cd teamspeak3-server-linux_x86
    $ ./ts3server_startscript.sh
    In you case use the startscript.

  3. #3
    Join Date
    October 2011
    Location
    Michigan, USA
    Posts
    2
    Ok, I wiped it all out and started from scratch with a fresh install, I uploaded the NPL key and the ts3server.ini into the directory then when I run the minimal_runscript.sh I get the below:


    *****.net [~/teamspeak3-server_linux-x86]# ./ts3server_minimal_runscript.sh
    TeamSpeak Server 3.0.0 [Build: 14957]
    (c)TeamSpeak Systems GmbH

    Logging started
    2011-10-15 17:35:09.977723|INFO |ServerLibPriv | | Server Version: 3.0.0 [Build: 14957], Linux
    2011-10-15 17:35:09.978017|INFO |DatabaseQuery | | dbPlugin name: SQLite3 plugin, Version 2, (c)TeamSpeak Systems GmbH
    2011-10-15 17:35:09.978092|INFO |DatabaseQuery | | dbPlugin version: 3.7.3
    2011-10-15 17:35:09.978363|INFO |DatabaseQuery | | checking database integrity (may take a while)
    2011-10-15 17:35:09.997452|INFO |SQL | | pruning old database log entries where timestamp is older than 90 days
    2011-10-15 17:35:10.012813|WARNING |Accounting | | Unable to find valid license key, falling back to limited functionality
    2011-10-15 17:35:10.013052|ERROR |Accounting | | failed to register local accounting service
    2011-10-15 17:35:10.013121|ERROR |ServerLibPriv | | Server() error while starting servermanager, error: instance check error
    *****.net [~/teamspeak3-server_linux-x86]#
    I looked at the file you mention but I do not understand about the mount commands etc and when I try them, the server indicates that I need to be a root user, another situation I do not understand... Any guidance on the problem?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Rookie Needs Help
    By mthatdan in forum Linux / FreeBSD
    Replies: 0
    Last Post: January 25th, 2014, 07:18 PM
  2. Querying my server remotely....
    By Skillz in forum Linux / FreeBSD
    Replies: 1
    Last Post: October 2nd, 2012, 08:02 PM
  3. Replies: 6
    Last Post: December 7th, 2011, 07:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •