Forum

Results 1 to 8 of 8
  1. #1
    Join Date
    April 2012
    Posts
    2

    Exclamation How to fix Server Groups & Channel Groups Of Clients Permissions

    Hello all ok I would like to know How to fix Server Groups and
    Channel Groups Permissions it is lock and I am Server Admin so I ask how do I unlock it what I mean by unlock it is gray out..And I cant grant Server Groups / Channel Groups / Channel Groups Of Clients Permissions to my self or anyone.. so how Do I fix this problem

  2. #2
    Join Date
    May 2011
    Posts
    5
    Check in Options -> Applications check box Advanced Permissions System.

    Also check
    b_client_skip_channelgroup_permissions value checked

  3. #3
    Join Date
    April 2012
    Posts
    2
    Hi sosnoff I did what you said and I still get noting Also I don’t know where to go to check
    b_client_skip_channelgroup_permissions value checked here is a screen shot..
    Name:  TS3.jpg
Views: 4663
Size:  87.7 KB

  4. #4
    Join Date
    May 2010
    Posts
    6,310
    Hello

    For the moment this has nothing to do this this permission.

    The first question is, it's a rented Teamspeak server or you are the owner ?

  5. #5
    Join Date
    October 2009
    Location
    Sebring, Florida
    Posts
    6

    Question Loss of Permissions Control by System Administrators

    Quote Originally Posted by Plague-PL View Post
    Hello all ok I would like to know How to fix Server Groups and
    Channel Groups Permissions it is lock and I am Server Admin so I ask how do I unlock it what I mean by unlock it is gray out..And I cant grant Server Groups / Channel Groups / Channel Groups Of Clients Permissions to my self or anyone.. so how Do I fix this problem
    Our server, the "GaMountain Server", is experiencing the same problem. We have two System Admins which include myself. Neither I nor the SA at the server site have been able to restore our permisions authorizations. We still have the same permissions orginally granted, but the "Set Server Group" and "Set Channel Group" are grayed out and we cannot change them. Also when we attempt to access "Server Groups" from the "Permissions" menu, we get an audio message that says "Insufficient Permissions" and shows us a blank form like that below. Has anyone been able to resolve this problem yet?

  6. #6
    Join Date
    May 2010
    Posts
    6,310
    @claypigeon
    Same question (read my previous message)

  7. #7
    Join Date
    October 2009
    Location
    Sebring, Florida
    Posts
    6

    Exclamation The server is located on site.

    Quote Originally Posted by florian_fr40 View Post
    @claypigeon
    Same question (read my previous message)
    Although I though your comment was a bit on the edgy side, I will reiterate what should have been apparent from the post, i.e., the server is on site at the GaMountain Site and is maintained by the System Administrator, William Mitchell, amateur radio operator, K1ZGB. I am alternate SA and located in Sebring, FL, amateur radio operator W1PI.

    My question is: What does it matter where the server is? Why would it make any difference whether it was a rented site or an owned site? You might enlighten me on that. The point is that we cannot access our permissions and can this be fixed or will it be necessary to completely reinstall the software?

  8. #8
    Join Date
    December 2009
    Location
    Texas
    Posts
    745
    Quote Originally Posted by claypigeon View Post
    Although I though your comment was a bit on the edgy side, I will reiterate what should have been apparent from the post, i.e., the server is on site at the GaMountain Site and is maintained by the System Administrator, William Mitchell, amateur radio operator, K1ZGB. I am alternate SA and located in Sebring, FL, amateur radio operator W1PI.
    The comment was perfectly normal. You posted a reply that did not include information that needed to be there (see next point). He simply brought that to your attention.
    Quote Originally Posted by claypigeon View Post
    My question is: What does it matter where the server is? Why would it make any difference whether it was a rented site or an owned site? You might enlighten me on that. The point is that we cannot access our permissions and can this be fixed or will it be necessary to completely reinstall the software?
    Depending on who hosts the server it could be there is nothing that can be done by us. If you are renting a server from someone you generally have to contact them because this problem requires serverquery access. If you are hosting yourself then you obviously have that access and we can help.

    Please don't assume that your intelligence is being insulted. Giving the benefit of the doubt can avoid embarrassment.

    Now assuming that you have serverquery access see below excerpt from documentation.

    Adding and Removing Clients to/from Groups
    ------------------------------------------

    To add a client into a server or channel group you need a
    i_group_member_add_power value that is greater or equal than the
    i_group_needed_member_add_power of the specific group. Analogously you will
    need a i_group_member_remove_power that is greater or equal to the
    i_group_needed_member_remove_power of the specific group.
    Additionally for either removing or adding a client from or into a group your
    i_client_permission_modify_power must be greater or equal to the clients
    i_client_needed_permission_modify power.
    Easiest way to do this is thru phycokiller's webinterface but you can do it through serverquery (see documentation in server_root/doc)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Resolved] Channel groups overwrite Server groups permissions
    By Itoyashi in forum Permission System
    Replies: 29
    Last Post: March 31st, 2019, 02:26 PM
  2. [Resolved] Server Groups and Channel Groups Permissions
    By BH-Gaming in forum Permission System
    Replies: 30
    Last Post: September 23rd, 2018, 04:51 PM
  3. Replies: 2
    Last Post: August 6th, 2014, 07:48 PM
  4. Replies: 10
    Last Post: July 29th, 2012, 06:53 PM
  5. Server Groups/Channel Groups overwriting other groups
    By Slicky456 in forum Permission System
    Replies: 4
    Last Post: June 8th, 2010, 06:25 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •