Allow/Restrict that Guest or Admins can assign/remove groups.

[dante696]

This is what you need, when one group should not set other groups.

Restrict group(s) to assign other groups:
Set a value for i_group_needed_member_add_power and set it higher than other groups i_group_member_add_power.

[DrJoker64]

Hey there,

I don't know why but when guests come to my server they can atribute to them selves the moderator rank has guests....
I need some help.

Thank you.

[Llamalord]

Now what what is going on but guest are able to give them self normal permissions...

[Shadow86]

Then it seems you setup your permissions in a wrong way.

Check about -> i_group_member_add_power and i_group_needed_member_add_power on the relevant Server groups the needed_add_power should be higher as the add_power so no one can give a group by themself

regards

Shadow86

[Llamalord]

Then it seems you setup your permissions in a wrong way.

Check about -> i_group_member_add_power and i_group_needed_member_add_power on the relevant Server groups the needed_add_power should be higher as the add_power so no one can give a group by themself

regards

Shadow86

Guest i_group_member_add_power & i_group_needed_member_add_power are set to nothing...

[dante696]

And nothing in both allows to set the group. A needed member add power of minimum of 1 (51 in best case)is needed in your server group. As explained in post #2 in this thread.

[Llamalord]

And nothing in both allows to set the group. A needed member add power of minimum of 1 (51 in best base)is needed in your server group. As explained in post #2 in this thread.

Well in doing this by mistake in the Server Admin i put i_group_member_add_power Grant to 0 and it should be 75...Now i am unable to change anything any ideas to get this back? I now rent my server as well...

[dante696]

This commands needs to be performed with the serveradmin login in the ServerQuery to get Grant back

servergroupaddperm sgid=X permsid=i_needed_modify_power_group_member_add_power permvalue=75 permskip=0 permnegated=0

X must be replaced with the Number of your Server Admin group (It's 6 is default, when you only have 1 virtual server.)

[tempo-]

Hi all,

I want to change who can give people what server group, how would I do this?

Thanks

[Llamalord]

This commands needs to be performed with the serveradmin login in the ServerQuery to get Grant back

servergroupaddperm sgid=X permsid=i_needed_modify_power_group_member_add_power permvalue=75 permskip=0 permnegated=0

X must be replaced with the Number of your Server Admin group (It's 6 is default, when you only have 1 virtual server.)

I don't have the serveradmin login...see how i rent the server.

I am trying to use YaTQA

I made a ServerQuery login with a password

[dante696]

Your own login will not work. It has the exact same permissions as you do have in TeamSpeak.
You must use the serveradmin login.

Contact your hoster, if the server is rented.

[Llamalord]

Your own login will not work. It has the exact same permissions as you do have in TeamSpeak.
You must use the serveradmin login.

Contact your hoster, if the server is rented.

I did contact them they told me they are unable to give me the ServerAdmin account to my teamspeak as then i would be able to see everyone else server is this true?

[dante696]

It's good, that they do not give out the login data! I would also would not give out the main admin account to customers

But they can perform the command with that login, to fix your problem.
It's the only way at this moment.

[Llamalord]

It's good, that they do not give out the login data! I would also would not give out the main admin account to customers

But they can perform the command with that login, to fix your problem.
It's the only way at this moment.

Ok so got everything fixed now!!

SO now i have to fix the guest area now!

I have the following settings please let me know if all is right Guest are still able to give them self Normal.

i_group_modify_power - None
i_group_needed_modify_power - None
i_group_member_add_power - Value 30 Grant 75
i_group_needed_member_add_power - Value 30 Grant 75
i_group_member_remove_power - Value 30 Grant 75
i_group_needed_member_remove_power - None

Is this correct?

[Chris]

Hi all,

I want to change who can give people what server group, how would I do this?

Thanks

if i_group_member_add_power value of the client doing it is => the i_group_needed_member_add_power of the group they want to assign and their i_client_permission_modify_power is >= the target clients' i_client_needed_permission_modify_power the group will be assigned.