Forum

Page 3 of 8 FirstFirst 12345 ... LastLast
Results 31 to 45 of 111
  1. #31
    Join Date
    June 2008
    Posts
    18,241
    This is what you need, when one group should not set other groups.
    Quote Originally Posted by dante696 View Post
    Restrict group(s) to assign other groups:
    Set a value for i_group_needed_member_add_power and set it higher than other groups i_group_member_add_power.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  2. #32
    Join Date
    August 2016
    Posts
    1

    Guests can become mods!

    Hey there,

    I don't know why but when guests come to my server they can atribute to them selves the moderator rank has guests....
    I need some help.

    Thank you.
    Last edited by dante696; September 5th, 2016 at 11:08 AM. Reason: merged, your groups missed i_group_needed_member_add_power

  3. #33
    Join Date
    June 2012
    Posts
    33

    Question Guest giving themself normal permissions?

    Now what what is going on but guest are able to give them self normal permissions...
    Last edited by dante696; September 11th, 2016 at 11:17 AM. Reason: merged

  4. #34
    Join Date
    March 2016
    Posts
    56
    Then it seems you setup your permissions in a wrong way.

    Check about -> i_group_member_add_power and i_group_needed_member_add_power on the relevant Server groups the needed_add_power should be higher as the add_power so no one can give a group by themself

    regards

    Shadow86
    Last edited by Shadow86; September 11th, 2016 at 07:30 AM.

  5. #35
    Join Date
    June 2012
    Posts
    33
    Quote Originally Posted by Shadow86 View Post
    Then it seems you setup your permissions in a wrong way.

    Check about -> i_group_member_add_power and i_group_needed_member_add_power on the relevant Server groups the needed_add_power should be higher as the add_power so no one can give a group by themself

    regards

    Shadow86
    Guest i_group_member_add_power & i_group_needed_member_add_power are set to nothing...

  6. #36
    Join Date
    June 2008
    Posts
    18,241
    And nothing in both allows to set the group. A needed member add power of minimum of 1 (51 in best case)is needed in your server group. As explained in post #2 in this thread.
    Last edited by dante696; September 13th, 2016 at 08:13 AM.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  7. #37
    Join Date
    June 2012
    Posts
    33

    Question

    Quote Originally Posted by dante696 View Post
    And nothing in both allows to set the group. A needed member add power of minimum of 1 (51 in best base)is needed in your server group. As explained in post #2 in this thread.
    Well in doing this by mistake in the Server Admin i put i_group_member_add_power Grant to 0 and it should be 75...Now i am unable to change anything any ideas to get this back? I now rent my server as well...

  8. #38
    Join Date
    June 2008
    Posts
    18,241
    This commands needs to be performed with the serveradmin login in the ServerQuery to get Grant back
    Code:
    servergroupaddperm sgid=X permsid=i_needed_modify_power_group_member_add_power permvalue=75 permskip=0 permnegated=0
    
    X must be replaced with the Number of your Server Admin group (It's 6 is default, when you only have 1 virtual server.)
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  9. #39
    Join Date
    September 2016
    Posts
    1

    How to change what groups server groups can assign??

    Hi all,

    I want to change who can give people what server group, how would I do this?

    Thanks

  10. #40
    Join Date
    June 2012
    Posts
    33

    Question

    Quote Originally Posted by dante696 View Post
    This commands needs to be performed with the serveradmin login in the ServerQuery to get Grant back
    Code:
    servergroupaddperm sgid=X permsid=i_needed_modify_power_group_member_add_power permvalue=75 permskip=0 permnegated=0
    
    X must be replaced with the Number of your Server Admin group (It's 6 is default, when you only have 1 virtual server.)
    I don't have the serveradmin login...see how i rent the server.

    I am trying to use YaTQA

    I made a ServerQuery login with a password

  11. #41
    Join Date
    June 2008
    Posts
    18,241
    Your own login will not work. It has the exact same permissions as you do have in TeamSpeak.
    You must use the serveradmin login.

    Contact your hoster, if the server is rented.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  12. #42
    Join Date
    June 2012
    Posts
    33

    Question

    Quote Originally Posted by dante696 View Post
    Your own login will not work. It has the exact same permissions as you do have in TeamSpeak.
    You must use the serveradmin login.

    Contact your hoster, if the server is rented.
    I did contact them they told me they are unable to give me the ServerAdmin account to my teamspeak as then i would be able to see everyone else server is this true?

  13. #43
    Join Date
    June 2008
    Posts
    18,241
    It's good, that they do not give out the login data! I would also would not give out the main admin account to customers

    But they can perform the command with that login, to fix your problem.
    It's the only way at this moment.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  14. #44
    Join Date
    June 2012
    Posts
    33

    Question

    Quote Originally Posted by dante696 View Post
    It's good, that they do not give out the login data! I would also would not give out the main admin account to customers

    But they can perform the command with that login, to fix your problem.
    It's the only way at this moment.
    Ok so got everything fixed now!!

    SO now i have to fix the guest area now!

    I have the following settings please let me know if all is right Guest are still able to give them self Normal.

    i_group_modify_power - None
    i_group_needed_modify_power - None
    i_group_member_add_power - Value 30 Grant 75
    i_group_needed_member_add_power - Value 30 Grant 75
    i_group_member_remove_power - Value 30 Grant 75
    i_group_needed_member_remove_power - None

    Is this correct?

  15. #45
    Join Date
    September 2012
    Posts
    6,079
    Quote Originally Posted by tempo- View Post
    Hi all,

    I want to change who can give people what server group, how would I do this?

    Thanks
    if i_group_member_add_power value of the client doing it is => the i_group_needed_member_add_power of the group they want to assign and their i_client_permission_modify_power is >= the target clients' i_client_needed_permission_modify_power the group will be assigned.
    Last edited by Chris; September 14th, 2016 at 08:43 AM.
    When sending PMs please make sure to include a reference link to the thread in question in the body of your message.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Not possible] Restrict Group to add/remove users from groups with less permissions
    By Matheus1748 in forum Permission System
    Replies: 11
    Last Post: August 23rd, 2019, 08:26 PM
  2. How remove Copy of Guest groups?
    By josask in forum Permission System
    Replies: 1
    Last Post: June 4th, 2017, 08:03 PM
  3. Admins can not assign Server/Channel groups
    By JudeSaint in forum Permission System
    Replies: 2
    Last Post: August 12th, 2015, 02:21 AM
  4. How to restrict who can assign groups to users?
    By HobsteN in forum Permission System
    Replies: 1
    Last Post: November 11th, 2014, 06:08 PM
  5. [Resolved] Granting Permition for admins to assign/revoke channel/server groups
    By shadowlancer in forum Permission System
    Replies: 1
    Last Post: June 26th, 2013, 10:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •