Forum

Results 1 to 14 of 14
  1. #1
    Join Date
    September 2012
    Posts
    11

    Exclamation Server Permission Problem

    Removed German part, Forum is english only.

    ENGLISH:

    Hey.

    I have a problem on my server.

    When I'm at a user group recruiting the following data:
    b_channel_join_permanent -> ✔
    b_channel_join_semi_permanent -> ✔
    b_channel_join_temprary -> ✔

    i_channel_join_power -> 5
    i_channel_needed_join_power -> 5

    The user can also join of channel that e.g. as join Power possess the 20th

    Can someone help me?
    Last edited by Chris; October 1st, 2012 at 01:42 PM.

  2. #2
    Join Date
    January 2010
    Location
    Catalunya
    Posts
    2,350
    Verify if b_client_skip_channelgroup_permissions , is enabled for this server group.

  3. #3
    Join Date
    September 2012
    Posts
    11
    Hi.

    Yes.
    b_client_skip_channelgroup_permissions is enabled für the Server-Group.

    But the Problem is the same.

  4. #4
    Join Date
    January 2010
    Location
    Catalunya
    Posts
    2,350
    When this permission is enabled, permissions set in Channels or Channel Groups, don't apply.
    Disable b_client_skip_channelgroup_permissions

  5. #5
    Join Date
    May 2006
    Location
    Europe/Czech Rep.
    Posts
    1,616
    Quote Originally Posted by MrDeeTop View Post
    ...
    b_client_skip_channelgroup_permissions is enabled für the Server-Group.
    But the Problem is the same.
    It was meant that this permission should be disabled/removed.

    "as join Power possess the 20th" I do hope you meant, that channel needed join power is 20
    while as you said user has from group channel join power only at 5.

    Please additionaly check :
    right click on user with such permissions/group setup, go to permissions > permission overview and type in filter box "join power"x
    then you should be able to see from where user get's higher permissions.
    I would guess "client permissions" or some other "channel/server groups" influence etc

  6. #6
    Join Date
    September 2012
    Posts
    11
    Yes thats right.
    Goggle has translate is

    At the end of the Post are 3 Pictures.
    There you can see the Permission overview

    Sry for my bad English.
    I'm from Germany
    Click image for larger version. 

Name:	1.png 
Views:	68 
Size:	79.0 KB 
ID:	6861
    Click image for larger version. 

Name:	2.png 
Views:	50 
Size:	78.6 KB 
ID:	6862
    Click image for larger version. 

Name:	3.png 
Views:	62 
Size:	68.5 KB 
ID:	6863

  7. #7
    Join Date
    January 2010
    Location
    Secret Base in Arctic Region
    Posts
    1,671
    It unnecessary to set permissions like "i_channel_needed_join_power" on server groups.
    Also, dont set "i_channel_join_power" on channel layer, unless you want users with less join_power to be able to enter that channel.

  8. #8
    Join Date
    September 2012
    Posts
    11
    Hello Alcazar,

    Sorry.
    My English isn't very good...
    I don't understand this sentence:
    "Also, dont set "i_channel_join_power" on channel layer, unless you want users with less join_power to be able to enter that channel."

    Can you explain it to me again??

  9. #9
    Join Date
    January 2010
    Location
    Catalunya
    Posts
    2,350
    Let me repeat myself:
    Quote Originally Posted by Jordi View Post
    When this permission is enabled, permissions set in Channels or Channel Groups, don't apply.
    Disable b_client_skip_channelgroup_permissions
    About:
    I don't understand this sentence
    Also, dont set "i_channel_join_power" on channel layer, unless you want users with less join_power to be able to enter that channel.
    This permission applies to users and user groups, and, normally, you don't needed set it in the channel.
    Last edited by Jordi; September 30th, 2012 at 03:47 PM.

  10. #10
    Join Date
    September 2012
    Posts
    11
    Hi

    I have set the I_Channel_join_power on 5 and the i_channel_needed_join_power on 0
    That did not work.
    I have set the I_Channel_join_power on 0 and the i_channel_needed_join_power on 5
    But that did not work either.

  11. #11
    Join Date
    January 2010
    Location
    Catalunya
    Posts
    2,350
    1- In the "test" server group:
    i_channel_join_power = 5
    i_channel_needed_join_power removed
    b_client_skip_channelgroup_permissions removed

    2- In the channel "Intern"
    i_channel_join_power removed
    i_channel_needed_join_power = 10



  12. #12
    Join Date
    September 2012
    Posts
    11
    Sorry.
    I have everything set up like you wrote it.
    Unfortunately did not work.
    Here is our ip address:62.112.144.61:9988

  13. #13
    Join Date
    January 2010
    Location
    Catalunya
    Posts
    2,350

  14. #14
    Join Date
    September 2012
    Posts
    11
    okey.
    Thanks to Jordi.
    Theard can be closed

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Server Admin permission problem
    By gxrem in forum Permission System
    Replies: 1
    Last Post: January 12th, 2014, 12:49 PM
  2. i have problem with Permission admin role on my server TS3
    By O.B.A.D.A in forum Permission System
    Replies: 1
    Last Post: October 22nd, 2013, 12:51 PM
  3. Permission Server Admin Problem
    By Don92 in forum Permission System
    Replies: 1
    Last Post: October 3rd, 2011, 08:51 PM
  4. Replies: 1
    Last Post: September 5th, 2011, 03:03 PM
  5. Replies: 1
    Last Post: September 5th, 2011, 03:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •