the description for those rights say that the power must be equal or higher than the needed power, so if i set:

Group A: i_group_member_add_power set to 70
Group A: i_group_needed_member_add_power set to 75

Group B: i_group_member_add_power set to 60
Group B: i_group_needed_member_add_power set to 70

Group C: i_group_member_add_power set to 50
Group C: i_group_needed_member_add_power set to 60

Group A should be able to add Members to both groups and Group B should be able to add Members to Group C, because the power is equal to the needed power for that groups ...

... but Group A is only able to add Members to Group C and not to Group B, and Group B can't add anyone to Group C - so the description or the comparison is not correct, since the power to add members must be higher and not equal than the needed power ...

so please change the behavior or the descriptions, because this could lead to wrong settings and unneeded searching for errors if both rights set to the same values ... or did i overlooked some?

regards cx4711