Forum

Results 1 to 3 of 3
  1. #1
    Join Date
    January 2010
    Location
    Germany
    Posts
    13

    Allow Channeladmins to change the needed join power

    Hi there,

    I had this idea that a Channeladmin could change the needed join power of his channel, so that only groups with enough join power can join his channel.
    I started with a server group that has a i_channel_join_power of 50 and is able to creating semi-permanent channels. That group got from me a i_channel_needed_permission_modify_power of 50, so that every channel they create has that value.
    Furthermore I gave the Channeladmin group i_channel_permission_modify_power 50 and b_virtualserver_channel_permission_list, so that they can see and edit the permissions.

    After testing: the channels, the servergroup creates, have the correct needed perm. power of 50 and the Channeladmins can see the permissions but they can't edit them. The error says "insufficient permission modify power", but they should have enough.

    What am I doing wrong?
    Is this even a good idea or should I stop struggling with it?

  2. #2
    Join Date
    September 2012
    Posts
    6,080
    assign the channel admin group the following permissions in addition to those you already have:
    i_permission_modify_power = 1
    i_needed_modify_power_channel_needed_join_power = 1 (Grant value for i_channel_needed_join_power)

    and they should be able to change the needed join power of their channel.

  3. #3
    Join Date
    January 2010
    Location
    Germany
    Posts
    13
    Thanks Chris, this works.
    I also got behind the grant value now

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Someone with lower than needed join power can join my channel
    By Spacecraft in forum Permission System
    Replies: 6
    Last Post: September 2nd, 2014, 06:47 PM
  2. [Resolved] 'Needed channel join power' is ignored
    By Hendrik de Tovenaar in forum Permission System
    Replies: 14
    Last Post: February 11th, 2014, 12:51 PM
  3. Default needed join power / inherit join power
    By omniomi in forum Permission System
    Replies: 1
    Last Post: May 28th, 2013, 03:02 PM
  4. No join power needed on new channels.
    By Trekkan in forum Bug Reports [EN/DE]
    Replies: 1
    Last Post: May 4th, 2010, 04:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •