Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 45
  1. #16
    Join Date
    January 2004
    Location
    Germany
    Posts
    13
    Same with this command:

    servergroupautoaddperm sgtype=45 b_channel_create_modify_with_codec_opusvoice permvalue=1 permskip=0 permnegated=0
    error id=2568 msg=insufficient\sclient\spermissions failed_permid=165

  2. #17
    Join Date
    December 2010
    Location
    United Kingdom
    Posts
    340
    Hello Dear Developers !

    Good work all of them work awesome but some error appear on the first time:
    Code:
    2013-03-04 11:23:01.790905|WARNING |PermGroupMgr  |   | permsid: b_channel_create_modify_with_codec_opusvoice(93), double assigned to sgid: 3, removing!
    2013-03-04 11:23:01.790947|WARNING |PermGroupMgr  |   | permsid: i_needed_modify_power_channel_create_modify_with_codec_opusvoice(32861), double assigned to sgid: 3, removing!
    2013-03-04 11:23:01.790966|WARNING |PermGroupMgr  |   | permsid: b_channel_create_modify_with_codec_opusmusic(94), double assigned to sgid: 3, removing!
    2013-03-04 11:23:01.790984|WARNING |PermGroupMgr  |   | permsid: i_needed_modify_power_channel_create_modify_with_codec_opusmusic(32862), double assigned to sgid: 3, removing!
    2013-03-04 11:23:01.791023|WARNING |PermGroupMgr  |   | permsid: b_channel_create_modify_with_codec_opusvoice(93), double assigned to sgid: 5, removing!
    2013-03-04 11:23:01.791040|WARNING |PermGroupMgr  |   | permsid: b_channel_create_modify_with_codec_opusmusic(94), double assigned to sgid: 5, removing!

  3. #18
    Join Date
    September 2012
    Posts
    6,079
    Quote Originally Posted by hunterpl View Post
    Hello Dear Developers !

    Good work all of them work awesome but some error appear on the first time:
    Code:
    2013-03-04 11:23:01.790905|WARNING |PermGroupMgr  |   | permsid: b_channel_create_modify_with_codec_opusvoice(93), double assigned to sgid: 3, removing!
    2013-03-04 11:23:01.790947|WARNING |PermGroupMgr  |   | permsid: i_needed_modify_power_channel_create_modify_with_codec_opusvoice(32861), double assigned to sgid: 3, removing!
    2013-03-04 11:23:01.790966|WARNING |PermGroupMgr  |   | permsid: b_channel_create_modify_with_codec_opusmusic(94), double assigned to sgid: 3, removing!
    2013-03-04 11:23:01.790984|WARNING |PermGroupMgr  |   | permsid: i_needed_modify_power_channel_create_modify_with_codec_opusmusic(32862), double assigned to sgid: 3, removing!
    2013-03-04 11:23:01.791023|WARNING |PermGroupMgr  |   | permsid: b_channel_create_modify_with_codec_opusvoice(93), double assigned to sgid: 5, removing!
    2013-03-04 11:23:01.791040|WARNING |PermGroupMgr  |   | permsid: b_channel_create_modify_with_codec_opusmusic(94), double assigned to sgid: 5, removing!
    Those are not errors, those are warnings. They appear because you run multiple instances on the same database and corrected itself automatically as you can see by the log output.

  4. #19
    Join Date
    December 2010
    Location
    United Kingdom
    Posts
    340
    Quote Originally Posted by Chris View Post
    Those are not errors, those are warnings. They appear because you run multiple instances on the same database and corrected itself automatically as you can see by the log output.
    Hello again !

    No ! i run the one server with 1024 slots but i did upgrade the server from 24.10.2012 3.0.7 Beta to new Stable release.

  5. #20
    Join Date
    April 2010
    Posts
    15
    Quote Originally Posted by Chris View Post
    Download the files directly onto the machine that is intended to run the files, uploading through FTP can cause errors. Make sure the file is there and accessible by the user running the server. Nothing to do with this release.
    OK, now works, thank you......something was wrong with the ftp file-transfer, i think.

  6. #21
    Join Date
    March 2008
    Location
    Belgium
    Posts
    3
    I have got this after update

    Code:
    2013-03-04 14:39:27.410913|INFO    |ServerLibPriv |   | TeamSpeak 3 Server 3.0.6.1 (2012-06-29 07:59:05)
    2013-03-04 14:39:27.411179|INFO    |DatabaseQuery |   | Please make sure you use the supplied ts3server_minimal_runscript.sh to run the server, or set LD_LIBRARY_PATH yourself
    2013-03-04 14:39:27.411203|CRITICAL|DatabaseQuery |   | unable to load database plugin library "libts3db_sqlite3.so", halting!
    some help?

    Edit: Fixed sorry

  7. #22
    Join Date
    September 2012
    Posts
    6,079
    do what the message says maybe?
    Start the server using the following command and it should work:
    Code:
    ./ts3server_startscript.sh start

  8. #23
    Join Date
    May 2012
    Location
    The 3rd dimension
    Posts
    956
    Quote Originally Posted by Chris View Post
    Preparations. Not supposed to be used at this point in time.
    Ok cool, do you know what the preparation is going to allow us to do? it is a bit strange including a feature that is non-functional. So, what will it do when it is fully introduced?

  9. #24
    Join Date
    December 2005
    Location
    Germany
    Posts
    164
    Quote Originally Posted by Chris View Post
    Temporary passwords are directing me to the defined target channel. Are you sure you recreated the password after booting the server? They are temporary and get lost when the server is shut down.
    I've created the temporary passwords AFTER I did the update

    I have tried again several times and I have found out that this has something to do with the Identities. If I add a new identity and connect using it, I connect to the right channel. If I try my normal identity, I will automatically join the default channel.

    I did an additional try with deleting my saved bookmark for the server and it is still the same.

    Additionally, I've found out that it is only possible to directly connect to channels where it is possible to join without special join rights. As I have tested this feature the last time (with setting a general server password), this was possible with any channel.

  10. #25
    Join Date
    March 2013
    Posts
    2
    Updated Client/Sever everything ok. The new codec is awesome the voice sound is more crispy.
    Last edited by PrototypeGR; March 4th, 2013 at 08:13 PM.

  11. #26
    Join Date
    December 2009
    Location
    Germany / NRW
    Posts
    74
    Works fine for me on Debian Squeeze x64!

    Keep on this great work!

  12. #27
    Join Date
    January 2012
    Posts
    7
    Everything is ok on my CentOS 6.3 x64....

    Loved the new codecs!

  13. #28
    Join Date
    December 2012
    Posts
    8
    updated without any errors on debian x64.

  14. #29
    Join Date
    August 2011
    Posts
    5
    Quote Originally Posted by Chris View Post
    .........

    Latest Android open beta can connect just fine, as for iOS the........
    But only with the Version in this Forum, you should update the Version in the Android-App-Store, because no one can connect with the Version in the app-Store to newer server-version.

  15. #30
    Join Date
    October 2003
    Location
    Germany
    Posts
    2,527
    Quote Originally Posted by [NWM]Paladin View Post
    I connected with my serveradmin via putty. When I use "servergroupaddperm sgid=6 permsid=b_channel_create_modify_with_codes_opusvoi ce permvalue=1 permnegated=0 permskip=0" I get the following message:
    error id=2562 msg=invalid\spermission\sID

    How can my serveradmin login dont have the permission?
    The name of the permission is b_channel_create_modify_with_codec_opusvoice... not b_channel_create_modify_with_codes_opusvoice.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: September 9th, 2013, 09:12 PM
  2. TeamSpeak 3 Server Version 3.0.6 Released
    By dante696 in forum Archive
    Replies: 6
    Last Post: February 1st, 2013, 01:54 PM
  3. Replies: 7
    Last Post: April 28th, 2012, 04:36 PM
  4. Replies: 0
    Last Post: March 19th, 2012, 06:50 PM
  5. Replies: 0
    Last Post: February 29th, 2012, 12:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •